Viewing all customer Discussions for:

87-238 SilverLine Window Roller, 17/32" Flat Wheel

Hello. I ordered a similar roller from here but it had squared of ends and woukd not fit. Hopefully the attached Pic will help find the right one.

I'm looking for the parts in the photos. The first two photos are tilt latches for a double hung window, I would also like to buy the clip that go on the top of the sash to open the latch. The third photo is of rollers on a glide buy window. I beleive all of these are your parts. Can you provide me ... (cont.)

Insert is of photo, wheels areoff as they are broken. rough whhel dimension 1-1/16 in. insert opening in screen is 2-1/4 in wide. roughly 1/2 inch inside dimesion if insert I can go as far as 1- 1/4 inch deep

Do I need to measure these, or can you identify without that?

I have vinyl glider windows wit two sets of brass roller for each window. The rollers have worn down. I have attached the dimensions. The nylon housings appear to be in good shape the rollers are 9/16 with a 3/8 pin

There is 1 roller and its plastic goes on a custom made slider on my porch.1/2 inch x 2 amd 1/8 long x 3/4 deepMike

Hi There, what type or rollers are these? Thanks, Robert

These windows are A 1970s vintage, I don't know the manufacturer. I have about 20 windows. Can you identify a match for these roller assemblies?

Product ID 5500 NFRC-SIL-N-009

Hi, I just replaced all of the channel balances on my windows, and they are all working great now. Thank you for your great products!I need 6 new Sliding Window Rollers With Plastic Housing.The roller housing is 1 3/8 inches.The wheels are brass and flat.There is a lip around the edges on all sides, ... (cont.)