pivot bar with a 1-3/8" hole backset

Hello! I believe the closest match we have is our 26-021 pivot bar. This has the same front hole position at 1-3/8", which is the most important detail. It has a different style front tip but it should still work in the pivot shoe the same way.

If you wanted the same style tip then our 26-452 is also something to consider. This, too, has a 1-3/8" hole position, but it's overall a lot longer. The plus side is that overall length rarely comes into play. There should be plenty of room for a part like this to install in the sash.

It's ultimately up to you. Let me know if you had any questions about these two products.

Sure, the 26-360 is also a contender. The horns are a little less pronounced, though, which is why I went with the 26-021. It's fine that only one side of the 26-021's tip has a horn. Those horns are useful in stabilizing the pivot bar in the shoe cam, but in my experience you can get away with just the one.

You got it! If you have any other questions, you know where to find me.