repairable storm window?

A quick learner from Raleigh, NC says:
My storm window is metal channel with a crimped corner, are these repairable? Suggestions
Profile picture of Dave Sr.
Dave Sr. from SWISCO responded:
It would depend on many factors. If possible, please send us a few photos of the storm window and the corners and we can recommend a solution. Please also provide dimensions of the frame as best as you can; specifically, thickness and width. Thanks!
A home owner from Raleigh,, NC says:
The dimensions seem to bbe 1.25" legs with a 0.20" key diameter. The thickness of the window assembled appears to be .375", while the key maybe around .125' Attached are some photos of both broken and good window units.
User submitted photos of window hardware.
Profile picture of Paul
Paul from SWISCO responded:
Take a look at our 95-191 top tilt corner key and see if this can work for you.
A quick learner from Raleigh says:
Thank you. Do you have any tips of how to remove/install the key? Specifically after prying the old out, how is it best to ensure the key stays in after prying. Any advise would be greatly appreciated.
Profile picture of Paul
Paul from SWISCO responded:
We do! In fact, we have a video on it. Check it out below and let me know if this helps.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)