window locks and cranks

Question

Dear Swisco Experts,

I'm repainting the casings and frames for my existing window. I'd like to replace the cranks, mechanism covers, and window locking mechanisms with white ones.

The crank mechanism cover says Caradco on it above the crank hole. The locking mechanism has 2 3/8" spacing between the mounting holes. Inside the mechanism, there are some US patent numbers and cast in the metal are the words TRUTH and the number 40399.

I have a couple other photos that don't fit into this submission. Maybe I'll do another one so I can get those to you too. If you could help me with what replacement parts to order, I'd appreciate it very much.

Best,
Steve

Dave Sr. · Accepted Answer

Since this is a Caradco window, I would suggest looking at our 39-155 and 39-156. I would just make sure to carefully go over our dimensions to ensure that they're the same. Also see our 39-107 cover and 39-114L handle. As for the locks, take a look at 38-097 and 38-098. I believe these are newer versions of what you have now. Keep in mind you may need a new keeper, since the old one may not work with the new locks. See our 38-079.