Custom Channel Balancers?

Question

Hello can someone help ensure I order the correct channel balancers for my windows. I have titling, plain balancers with 34B stamped on them. The top of the balancer connects into the inner window frame with a hook while the bottom has a T-Lock Shoe with the part number (6679000).

It appears i could order the 34" 795 Series Channel balancer but i'm unsure if the installed T-Lock shoe is the same as the 6679000 part number i currently have. Also i would need to replace the top screw hole with the hook.

If i order the correct T-Locks and hook separately from the standard channel balancers i see available here, are they easy to install onto the balancer? Last question is that i assume each window should have one of these mounted on both sides of the window, correct?

Casey · Accepted Answer

Hello,

It looks like your balance has the 15-198 clip attached to the pulley, which differs from the screw tab used without stock S795-34 (34B) balances. We can supply them through a custom order but we'll need to know the number of balances you need. Make sure to check each window to confirm if they have the same 34B stamp. If not, we'll need to know each stamp and the quantity you need, with the minimum being two of each.

Profile view of 15-198

Detail of 15-198

As for the shoe, it looks like the 15-195 would be what you need but I recommend removing your shoe from the window jamb to confirm the specifications below match yours.

Dimensions for 15-195

Alternate view of 15-195