No identifiers on main mechanasim. Small pivot arm has No. 30146

A home owner from Cherry Hill, NJ says:

Can you identify these cranks? They look like the Caradco 39028 on your site, except that the crank arm is longer. The 9 1/2" measurement on your site looks to be 11 1/2" on my mechanism. One of the attached pictures shows the crank mechanism wit a tape measure to show relevant measurements.

Thanks in advance for checking your stock for a crank that would work. Bob 

Thumbnail of the uploaded file named PXL_20210401_214909015.jpg
Thumbnail of the uploaded file named PXL_20210401_213748942.jpg
Thumbnail of the uploaded file named PXL_20210401_173828021.jpg
Thumbnail of the uploaded file named PXL_20210401_213654857.jpg
Profile picture of Emily
Emily from SWISCO responded:

Take a look at our 39-013 and 39-014. It has a 13-1/2" long arm when measured from wheel center to gear center. This looks like it would be a closer fit for what you need. Let us know what you think. 

Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)
Current wait time is 4-7 business days
We promise that one of our experts will personally get back to you as soon as they are able. Thank you very much for your patience and understanding. If your inquiry is time-sensitive, please feel free to reach us at 856-317-6263 or at