Sliding Door locks with handle (Complete Set)

A home owner from woodbury MN says:
I need the sliding door lock with handle as per attached picture. We could not find that lock from any hardware stores. Please do the needful ASAP.

Also attached the picture of the sliding door stopper. I would like to know is there one part which hold both holes or should i get the same one as we have in the picture
Patio handle
Profile picture of Dave Sr.
Dave Sr. from SWISCO responded:
For your handle I would consider our 82-005. The mounting holes on the 82-005 are 4-15/16" apart, on center. See if your mounting holes are the same. If not, you will need to drill new holes.

As for that secondary lock at the bottom, I would suggest looking at our 82-040. Measure the pin in your lock to see if it protrudes 1/2" like the 82-040. If yours pin is longer, you might need to use the 82-053 or 82-052 keeper. I would keep your secondary lock the same. If it works well for you, there's no need to change it.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)