Viewing all customer Discussions for:

Door & Window

Hello, I have attached photos with measurements on some parts that broke on my window. Please let me know if this is adequate information to see what the new part is. I am sorry that I did not send pictures of it installed, I found this option after I already removed it. I also found what I believe ... (cont.)

Hi Do you have anything like this to hold in storms and screens. From 1960 Kaiser Aluminum.

The door will not lock. Do you know what parts I need to replace it with ?

I need help with indentifying replacement balancer for my 15 year old window master windows. These are 30 inches in length and have the following stamped. 2930 GM. These balancer are 1/2? x 3/8?. Will order when I get a response please. Thank you

I have a single hung window that has a broken balance. It is a Kinro and the # on the side of the balance is 26-4 DI5 CMC 34. The rivet holding the spring to the top broke loose and the cord is broken/cut. I will need to replace the complete balance. It is in a modular home built in 2012-2013. ... (cont.)

3/4 in inside dimension on the leg without any nubbin. 3/4 in inside dimension on the leg with a nubbin between inside and the nubbin. part is 3/16 in thick The windows are likely originally installed around 1976. Please let me know if there is anything else you would like to know. ... (cont.)

Could not find this item in your website. Please help.

Need window crank operator for 2 windows. Not sure what you need for measurements.

HOAQ 21A

Jeld-Wen casement windows, circa 2005. Inner seal in frame is beige, outer seal (on window) is black. Attachment contains 7 photos, with measurements. The following numbers/letters are in the corner of each window: 166375-xx, where xx varies across windows; CIG-9-3-04 LO EThanks,Joe ... (cont.)

Looking to find replacement glazing for my household windows. Don't know the manufacturer of the windows, but I have good pictures of the glazing. Home was built in 1995. Double Pane.

It had a crush letter under on metal and it a window lock for hung window

Hi, I?m looking to replace the weatherstripping on my windows the peices have split apart. The close up piece is,from the vertical right side of frame. I have glider windows. The next 2photos are of bottom horizontal view, of window, the left side is cracked. I?m not sure how to remove the remo ... (cont.)

Do you have a window latch for this Vetter casement window? It was installed in 2004.Thanks, Jim

I need a mortise lock with 3 9/16" installation hole centers. My lock is identical in design to your item #82-226 Mortise Lock 4 5/8", only smaller. From end to end, the lock is 4 5/8" in length (unlike your #82-226 that is 6 1/8" in length), but the hole centers are only 3 9/16", unlike your item ... (cont.)

Looking to get a Quote please. Thank you.

Need operator mechanism for casement window. The handle that moves horizontally broke as can be seen in the photo. Only identifier is the number 30350 on one of the hinges.ThanksLen

I moved into a older home and have broken parts on the windows. I do not know the manufacture of the windows and need to find replacements for these pivots. Any help would be appreciated

Yes, it is by the weight of the window. Each balance has a chart on its product page, and the chart tells you what weight range is covered by which color. The red and blue ranges overlap a little, so it's not unheard-of to alternate the two colors.For peace of mind, you should know that if the windo ... (cont.)

Hello, I'm looking to replace a casement operator for my left side window.. attached is the manufactures photos and parts.. I'm not sure if this window is under warranty. manufacturer: NFRC 100 code: HII-280-1 spec; NFRC series: CLCASE mst: 280-m-006,7,14,15 Thank you