Viewing all customer Discussions for:

Door & Window

The model number on this plain channel balance is (12/1) Unique 26-C-30 for the left side of the window. Is the broken plastic piece replaceable or do we have to buy a whole new unitl? Thank you Marty

Help with window balance

I have a new wooden storm door that is 1 1/8 thick. I wanted something more substantial than the mortise screen door lock set but less involved and expensive than the complete mortise lock set. Would this work? I have plenty of space where I want to mount it.

Hello. I need to order the correct part. I've read the other threads and I understand the difference is based upon when the window was mfgr. However this house was built in 98 and 99 so I'm not sure which windows we have. From looking at the two pictures, both parts seem identical. The screw ho ... (cont.)

I am ordering the T-Spline 59-237 which is exact fit for my slider screen. Can you recommend a splining tool for this type of spline? It would seem I need a "V" roller or very narrow tool to fit on each side of the "T". Also, do you have bulk screen rolls?

Is this roller got spring in it

The mounting holes and width of my mounting plates do not match the measurements you display online. Also, we have a key from both sides which you do not show (this is not a show stopper). Thanks, Rob

I need to order 22 inch spiral tilt Ballast I am wondering about the loader tool. I assume I need to charge the balata in someway. I assume that's by winding the spring. What tool should I get? And if there is a link somewhere to tell me how to do it I would appreciate it thank you ... (cont.)

I am looking for a Certainteed lock and keeper # 45183. The window is about 22 years old.

Do you know if there's any "codes" that say these sash stops cannot be used in certain (i.e. bedroom) windows?

I found that the 29" Series 751 Channel Balance matches the right side balance that i need to replace as far as the numbers that are stamped on the previous broken balance. The left side balance however has a few differences than the right side. The right side is stamped (DB J03 28 HD) and the left ... (cont.)

Per your great selection setup,it appears I need a 27 350 series. Is there a way to verify a correlate a number that is on my broken balance that reads----24 4 FW CMC 10 -----Thank you.

Are the 600 able to be changed with the 670 series if I remove the old pivot shoes?

I'm ready to replace channel balance on 10 of my windows that were originally installed 25 years ago when house was built. The stamp on the balance is "2830" so according to your chart I should get Series 390 29" channel balance option 2830. We have constantly struggled to open and close the window ... (cont.)

Hi, I have a number of Caradco casement windows in my home that were installed in 1986. A couple of them have experienced mechanical/operator/crank failures while still maintaining a good weather seal, no warping or rotting and sealed double glass. I would like to fix the mechanical problems if poss ... (cont.)

2959 # parts

looking for replacement Andersen Window balancer

I need parts 2950 for my window. What do I need to order?

new castle xt / insulate 960, standard sliding patio door (XO), CPD: PWG-M-144 hi would you happen to sell the sliding patio door lock with key access from exterior? i've attached a few pictures of my current keyless door lock. any help would be appreciated thanks

I'm looking for a Truth casement window crank the numbers on it are 30614 and 30893 On Truths web site they have stock number HW38 Dyad .r7 This crank has a stability tab.