Viewing all customer Discussions for:

Door & Window

The 40-117, Inside Latch, is not available in a puddy color.

Is 90-090 thinner than 90-006?

Does this unit use a set screw? I am looking for a crank in white, approx 7/16 diameter hole (spline?)that does NOT use a set screw. I know some of these just snap on, eliminating the old problem of set screw-caused damage.

I recently purchased the Internal Latch Patio Door Handle to replace the oldie from the 60's. When placing the keeper flat against the edge of the door with the hook inside the opening it is approximately 1/8 inch short of alowing the latching mechanisim to engage the catch. From the top of the kee ... (cont.)

can i use your metal cranks to replace the plastic cranks in my storage barn?

I need to know the correct spline and screws. I am planning to purchase 3 wickets.

Yes, the 39-109B is interchangeable with Pella 0C080001; it will fit your casement window operator.

I just wanted to thank you for my order (I had ordered this part and a couple others). I had a local glass company come out and estimate $250 to fix my door because I could not find hardware for it at Lowe's or Home Depot. I was able to get all the hardware I needed from you guys for way less!! ... (cont.)

The replacement window balance you need is the Series 380, 26" balance with the stamp option of 2540.

I have a channel balancer which is 25 inches,with the #2430 on it.After looking on your website I found several options fitting this! Can I buy any one of the 25 inches balancers with the #2430 on it or not. Can you recommend the best one you have.THANK YOU!!!

I have two windows outfitted with a Keller Top Latch. I see that I can get the exact part from your website. My question is on the installation. I am fairly good at home projects. So, is the replacement of the latch something a normal homeowner can do? It looks to me that by loosening a few scre ... (cont.)

Yes, the 84-010 and 84-071 roller assemblies are interchangeable. The difference between these sliding screen door rollers are the wheels, the 84-010 has a nylon wheel and the 84-071 has a steel wheel