Viewing all customer Discussions for:

Door & Window

helps window move up and down without just falling

Hi, I was looking for this sash lock for a couple of my windows. Would you sell these parts locally? I am based out of Virginia. Thanks, Rohit

Looking for replacement hinges

Total window weight is 25"lbs. please help with replacement

Hi I need to know what replacement part you guys have for this non tilt channel balance, it's 1/2" wide and the number is 2640

26 5 JW CMC 7

This is the door strike plate on the door casing. It is 7" long

Looking to replace the handle on the door. Scott

I have 2001 Milgard tilt windows and need the plastic that latch the windows replaced and the plastic piece that goes around the top latch as well

Corner block is 3/4" wide x 1" high x 5/16" thick. The side frame leg is 1/4" wide x 3/16" thick. The bottom frame leg is 11/16" wide x 3/16" thick. The end of the bolt is 5/16" wide x 1/16" thick and extends approx. 7/16".

My lower sash outer glass is cracked and I need a replacement sash. I don't think I can replace just the glass Thanks Sticker marked Sears Columbia 383583-3 DH99 16056

Hello, Do you have Coil Balance Spring and cover for MI window Series 4300 MTL-2 part? Thank you!

We have older Alcoa windows with sliding end panels; one of the screens is warped and will no longer stay in the window frame (it has fallen forward and is obstructing the opening of the window). Can a replacement screen be purchased?

Here is a pick of the balance rod with clip required for my window. Last time I order it was part# 28D balance w/15-198 clip. I have a previous order # 2344972 which was order and worked. Also have additional parts I need to add which are standard parts.

Need door handle for this center hinges patio door.

I need a replacement handle and lock kit for this door. the door is approx 20 years old.

Hi, I'm having a hard time identifying this casement window crank with arm and the track. The problem with it is that the arm keeps popping out from the track as it seems like the plastic bushing that slides on the track is worn out. Just wondering if you sell a replacement part that will keep this ... (cont.)

That part goes on the balancer. It's open cam. I ordered one that was similar on Amazon. It was too thick. In my photo the hooked tip part is broken off that locks onto the little bar in the window balancer.

Hi, I have 2 Marvin Windows that the openers are damaged as the attached, can you identify which one I need and do you sell it?ThanksAndre

Good afternoon. I talked with Marvin window company to help ID parts and they gave me two parts that they no longer manufacture. I am looking for one Marvin Dual Arm Roto-Gear Operator (Ultimate wood casemaster disc LA Pre 2010) and one Sash Track (Ultimate wood casemaster disc LA Pre 2010). The win ... (cont.)