Viewing all customer Discussions for:

Closet

I know this is a long shot but figured it was worth a try. During a recent renovation of a built in 1960 home, the top pivot hardware for the bifold doors in one room were misplaced and lost. I'm trying to see if anything like this old style still exists or if there's anything newer that would be ... (cont.)

I hope these pictures are helpful, and I have been told that the manufacturer may have been Ducasse, but the truck slider on our 12 year old sliding door finally broke. I haven't had any luck tracking this part down on my home, and so my new friend at Home Depot suggested reaching out to see if you ... (cont.)

Hello , i would like to have a wider opening currently it opens to 18" the goal if possible is to open the door with a clear of 19 or 19.5 " if there is a smaller upper pivot that I could use to make the opening door to be wider ?

I have 9 bi-fold doors that were in a flood, swelling the bottoms, making the existing door guides too narrow to fit through. I either need larger door guides to allow the thicker door or adjustable door guides to do the same. Please help!

I am trying to fix some metal bifold closet doors, but the attached pins are missing on a couple of doors I need to fix. Will your hinges replace these okay? They are very similar but slightly different. Here are the parts I see: 21-007, 21-001, 21-065, etc

I am trying to find the attched name of the bracket for my sliding wardrobes

Hi I'm working in an old house with bifold metal doors in a closet. Owner doesn't want to replace doors just repair. The label on the door says Evans products company but I can't find any info on the internet about the doors or company. would you be able to help me match the part I need. only one se ... (cont.)

We ordered new roller we need adjustment piece to lower or raise rollers

Looking for rear hanger replacement roller for bypass closet doors.

I have a rental house where the tenant removed the bi fold door and parts are missing. I have no bottom trackat all and am missing a lower peg, I believe from looking at other posts that it should be the adjustable peg. The track should be 24 inches long. I have attached a picture of the top track, ... (cont.)

Hi, Need help to order the correct Left and Right roller assembly and also the track . Please look at the picture and advise me. thanks,Chye

I have two sets of bi-fold wood doors that will not stay closed. A friend of mine who has a similar set of doors said that I need a top center spring to keep pressure on the on roller guides to keep the doors in a closed position. I ordered and received part 23-130, but I don’t understand ho ... (cont.)

Good Morning Do you carry these closet door rollers? If so, how much for two? -- Thank You,

our home was being renovated and we need a brand new track for our 30 inch double mirrored closet doors by Stanley. The opening of the closet for the track is 59 3/4. The wheels appear to be convex. Can you help?

Need to replace left and right side rollers for one side of mirrored closet door.

Bonjour je cherche ces éléments là les supérieur 4052-000 et les inférieur 4050 sans roulette Merci j'ai passé commande des 23-215 pour les inférieur et 23-093 pour les supérieur mais je suis pas sur du coup.

Hi, I need a longer track than 72 inches. Are you able to do any custom length tracks? Or, do you sell any linking hardware to combine two shorter tracks? please see the attached photos, and thank you for your guidance.

Looking for these type of rollers very old. The one wheel one is bent. Heavy duty metal. Door is all wood. Looking to find this exact one that'll work on the track that is existing.I want to avoid demoing wall to get to track. Thank you. MINNY

Almost matches paniflex 23-142 but differences in roller dimensions: mine is 3/4" diam and 5/16 ht, so wider and shorter than your item. I also need a linkage comprised of 2 springs with a metal plate at each end which goes across the central hing, I assume to add rigidity when closed. See photo -- ... (cont.)

I need two of the mirrors only with the chrome edging, size 11 5/8 x 94. I had two of the mirror's come off the door and break while out of town so I am looking for the replacement mirror panels.