Viewing all customer Discussions for:

Closet

I'm looking for these 3 1/2 metal sliders and the plastic holder for my bi-fold doors.

Bifold closet doors from the 60's. There is a plastic wheel which fits into the track at the top of the door. The wheel is on a threaded spindle. One of the plastic wheels is broken, and I can't find any threaded replacement.

Attached are photos of the bottom railings that I wish to replace I will need rails for two closets, which means that I need two 4 foot rails and one 6 foot, with a width of 2 1/2 inches. As per pictures, I do not see the need to repair rollers or any other hardware. Can you confirm which railings ... (cont.)

Found a pair of mirrored bypass doors on the curb with the hardware fully intact. I want to install them on my closet, I just need help choosing the correct tracks.

I'm looking to replace these I think they have a 3/4 roller 3/4 front & 1-3/4 rear

Looking for replace casters/wheels for mirrored glass wardrobe doors. I have taken a picture, hope this helps identify the correct replacement part. Thanks for your help

I removed a pair of these large framed rollers from the top of a heavy mahogany pocket door that was hard and noisy to move. I'm not seeing any replacement this large on your site. I was thinking of switching to the 23-175 side mount rollers. Is there a better solution? Thank you, jw ... (cont.)

Hello, I need 60" of the track I posted and 4 new rollers for the bottom. Thank you

I need to replace the roller guides. The only name I can find is on the hinge hardware ( Stanley). Pictures are attached. Thank you. Greg

Hi there. I have some old monarch safety mirror wardrobe doors that I'd like to install. The dimensions of each door is 36 wide by 72 high. The opening of my wardrobe area is 72 in by 72 in. I believe the rollers are concave and their dimensions are 1 - 3/8 in diameter and 3/8 in wide. Hole to hol ... (cont.)

Where can I get a replacement track for the closet door?

Can anyone identify this closet track as I need to replace the one I have as it's damaged.

bottom fixed door pin housing sheared were pin engages bottom door support Need new housing or entire bottom corner piece. Location : facing mirror left side bifold bottom attachment. Photos attached. Mirror bifold only has a attached tag simply stating Sunshine Mirror Any help would be apprecia ... (cont.)

Hi there, I have one handle left from a huge closet that is in a house that I just purchased. I found the label of the door and found your website. Maybe you could sell me a few more handles because the closet is wide and it needs more than one handle. We probably need about 4 handles. ... (cont.)

Hi. I need to install two closet sliding glass mirror doors but I need the bottom tracks. Can you help me identify the right track for my project. I need a 60 inch track. Thank you.

Need 3 parts

I just measured the length which came out to 9ft 5.23ish inches. Not only can I not find this particular track but I definitely can't find anything that length. This closet has three doors on it and I need to install another track behind this one so each door is on its own independent track. Help pl ... (cont.)

Not sure why bottom rollers are out of track and I am missing a roller on door. Can I fix the two and buy a replacement one?

Looking for replacement bushing pictured below. It's for a Stanley series 221/321/351 door, part number (per the schematics is No. 4465. Thank you for any assistance you can provide.

I am trying to replace the track. Please advise if you may have something similar to the attached photo. Thanks, Robin