Viewing all customer Discussions for:

Closet

Looking to replace top roller and bottom guide on sliding closet doors. Doors are 92-3/8" tall 36" wide Top roller measures 2-3/4 tall 1-1/4 wide 1-3/4" wide where hook is. Bottom guide measures 2-3/4" tall 1-3/16" wide 1-3/4" wide where hook is. You have 23-017 and 23-018A not sure they will work ... (cont.)

i have a pair of 24" metal bi fold doors and based on the pics i need the following parts so i know what to order: -top pivot pin -top rolling pin -bottom pivot pin -bottom rolling pin -48" top track -48" bottom track

Trying to match these top piviots which are broken or missing some pieces.Piviots are braded into the flat plate that screws to the top of the door. HELP! Thank you

We are in need of a top pivot slide that is shown in photo. The track seems to accept a slide that has 0.75 over all wings to retain it in the track. The doors currently have spring loaded pins that are 0.250" diameter at the tips. Please help. Thank you.

Dear Swisco, we have an old "place-built" sliding mirror door where the wheel has broken of its pulley. We have looked left and right for a fix and finally stumbled upon your site. My guess is that 23-028 is fairly close to what we have. Do you think it would work or do you have a better suggestion ... (cont.)

Hello The wheel has broken on this door, can you help ?

Hello, I'm looking for both top and bottom track for the doors in the pictures I have included. This is from a remodel and I never saw the original tracks that were installed. Looking for suggestions. The label on the back of mirrors refers to Monarch mirrored doors. Thanks

Looking for glide master pocket door hardware

i need to replace a corner bracket that pivots for a closet swing door (for about a dozen doors...) currently it is that stanley 4212 metal bracket with an insert for it that says part no. 01-5264 sorry i have no picture - it is similar to the above pictured track wheel assembly, but it has a pivot ... (cont.)

need a 72" bottom track that is missing this is the existing bottom of door hardware on the mirror doors.

Hello, I am looking to replace the tracks (currently they are the same profile top and bottom) with a new low profile top track and floor pivot without the track. I am looking for the top track to be a silver or white finish. Do you have a kit or list of parts that would appear to work? The opening ... (cont.)

If you have this Sliding closet mirror door rollers and tracks? Please help me how I can will order it's?

Only marking on either pice is STERLING Need to replace 2 sets of these. Whatever works...?

Please help in determining part # for replacement fit. Thank You ?

the track has two mirrored doors . track is about 3" wide x 59" long

These wheels are from a large 4 x 8 mirror closet door (2 each). They mount on the bottom outside corners of the door, tab up, facing the outside edge, behind a valance, they are not in aq channel, with a 2" sheet metal screw through the hole in the tab, with the tab facing the outside edge (note th ... (cont.)

need help figuring out which is this please

Do you have the track for this product? Product Code: 23-146. Ours is in bad shape and bent up.

Hello, I have a broken plastic piece that I would like to replace. It is a square plastic part that seems to hold the outer pin in place on my bifold door. Not the inner pin that does not move, but the outer pin that slides. This looks like it serves as a bushing for the pivot pin. I broke this ... (cont.)

Looking for parts or replacement. The roller is 1 inch diameter