Viewing all customer Discussions for:

Closet

Need 3 parts

I just measured the length which came out to 9ft 5.23ish inches. Not only can I not find this particular track but I definitely can't find anything that length. This closet has three doors on it and I need to install another track behind this one so each door is on its own independent track. Help pl ... (cont.)

Not sure why bottom rollers are out of track and I am missing a roller on door. Can I fix the two and buy a replacement one?

Looking for replacement bushing pictured below. It's for a Stanley series 221/321/351 door, part number (per the schematics is No. 4465. Thank you for any assistance you can provide.

I am trying to replace the track. Please advise if you may have something similar to the attached photo. Thanks, Robin

Looking for this specific product. The roller wheel is different from the many others. Do you have or can you direct me to that manufacturer or do you have something similar you can provide.

These are pins for folding closet doors. The only marking I can find on the doors is that they were manufactured by Float-away Door Co., a division of Kinkead Industries, Inc., in Atlanta, GA. The house was built in 1971 so the manufacturing date would likely be 1970-1971.

I need to replace this closet door track

This was the part I thought would fit but what I got did not fit the closet doors. if you have this please let me know.

I am the proud owner of a house built by the owner of a lumbermill who LOVED pocket doors! Unfortunately? They are breaking! This is the same AFC marking and same roller you have twice on your page. So specific, I simply stole an image from a previous post and added two of my own. I understand the A ... (cont.)

Hi- We are looking for replacement door brackets/rollers marked Grant Rocket 1013. They have an approx 1" offset and a 3/4" wheel. Do you offer anything like this or have another suggestion for us? If we can't find a replacement would we remove the tracks and just buy something that fits or buy ... (cont.)

This is on a dated metal framed bypass closet door with particle board panelsThank you for any assistance! I've looked on EBAY, your company's website as well as others. Best Regards Rob

I need to order two bottom tracks for mirrored sliding doors: 54109981 240-823 I don't see it on your website, what should I order? Thank you John

I need a sliding closet door hardware piece with double 3/4 inch wheels. It seems everything at the Depot and the Lowes have 5/8 wheels and it wont fit in the track.Can you help me.Mike T

Hello, One of my closet door roller is broken. I need to replace it. The reference on it is Stanley 2012X-IR. See the picture if needed Do you know where i can buy one or by a compatible one ? Thanks a lot ! Fab

Hi, I have 2 sliding mirrored doors on my wardrobe which have Ramtrack hardware. These don't seem to adjusted properly as the doors do not open or close properly, they appear to be dragging. At the top of the door the rollers are locating properly, The bottom rollers on each of the doors are convex. ... (cont.)

I can't tell what is wrong with this bracket. It tightens up in the track but then slips when the door folds out. Would you recommend replacing the entire top track and hardware?

Cox 21-717 - - I'm looking for this particular part that has ball-bearing wheels as opposed to the wheel on a pin, Home Depot-type knockoff roller.

It appears your 23-038 would be the appropriate replacement for my broken nylon Guide. Are instructions available to disassemble and assemble the replacement?

Hi Swisco team. I have a 80s/90s sliding mirror wardrobe and the top hanger runner guides have seen better days. Unsure of the brand. The broken sliding runner guide is 21.50mm height x 37.80mm wide. Looking for the top sliding runners. The mirror doors are held with spring pins. Thanks. ... (cont.)