Viewing all customer Discussions for:

Drawer & Cabinet

Rear drawer track socket, right side, Hardware model stamp ; MARSH # 8401160. Thank you Barbara

Part # 32-076 fits perfect with existing socket on one drawer , part # 32-076 doesn't fit on end of track the original socket is only plastic If needs be on the one drawer I'll replace the entire track!!! The case runner is correct, the socket is not!! Any advice or suggestions would be greatly app ... (cont.)

There are no numbers or other identifying marks on the drawer or runner. It is made of white plastic and found on the underside of the drawer.

standard overlay soft close timeless

There are no identifying details, but I saw a picture with your website added as a watermark. It appears to be the same hinge.

looking for replacement rollers

Looks like a spacer that keeps the tray guides away from the sides of the cabinet.

Want to replace 1/4 inch overlay single demountable hinges with black hingesThese are compression hinges. My cabinets were installed in 1988.

Center mount drawer track, 1-1/4" wide , 1/2" deep , 15" length or longer.

Hello. I need 2 replacement handles for my Thomasville dresser. Most over the counter handles do not work due to the 2 holes required for it to fit correctly. 4.5 in between the holes. Do you have any thing that matches? Thanks in advance

Looking for 3 sets of these. 16" long and 15 3/5" long for Bassett dresser. The plastic twice is marked with your company name.

Mine is 4 1/2 from hole to hole Can you please show me what u got that will fix mine. Thanks

these have a left-side and right-side status.

See photo - this piece broke (the plastic cracked and isn't holding the channel/slide). It is a Delta Series 50 - I don't see this replacement on your website. Please advise if it is available.

There are two numbers on the hinge the first is a part number 60333 with 10 beneath it I believe visible in photo 0852 the second is the patent not quite so easy to read but I make it to be 36131511

Hi there - can you tell me the width of the butt portion of the hinge? I purchased a hinge that has a 1" butt, only to realize I really need 3/4". :( Thank you - Lee

Hi, do you carry this type of hinge? Thanks

need left and right drawer slide bracket for ferrari vanity drawer. Enclosed is picture of right side. thanks Mike

If ordering quantity of 1, does that give you 2 complete slide assemblies-One for each side or is would that be just 1 slide assembly for one side of the drawer only? My drawer would need both sides because this slide is wider. My slides for this drawer are 1" versus the 32-235 slide which is 1 3/4" ... (cont.)

Hey Guys, Think I found the track guides I need to replace for some Stanley bedroom furniture (Kenlin case runner 32-076 & drawer socket 32-082), but I need to replace the actual metal tracks as well. Most are kinda bent like the one pictured. Do you carry them as well? Thanks, Jim ... (cont.)