Viewing all customer Discussions for:

Drawer & Cabinet

I'm trying to find a replacement rear kitchen drawer hanger bracket for the left side. I don't know the make of the cabinets or the hanger at all. It is tan in color and made of plastic.

Could you recommend a drawer glide for Hitchcock bedroom chest of drawers and dresser. Old ones have broken over the years and drawers are now misaligned in opening.Thank youCharles

The door panel is 3/4 inch deep and hinge looks like the picture attached. They are approximately 2 1/4 inches long. I also need door pulls approximately 4 inches long per attached picture. I need both in antique brass Thank you

Would like to order replacement cabinet rail hanger pictured. I think the broken piece is supposed to have two pegs not just one. No markings besides LEFT and RIGHT on the hangers. Thanks for the help!

Hello, I brought a 3 drawer dresser in 1993 its by childcraft and I need the glide and lock hardware. Please see pictures in the attachment and let me know if you have it and how much. Thank you

Hello, About 30 years ago, I had Quaker Maid kitchen cabinets/drawers installed. The rear plastic brackets that hold up the guide rails on one of the drawers broke and I'm looking for replacement parts. Attached is a photo of the bracket. The back of the bracket measures 1 5/8" x 2 5", it's 3" l ... (cont.)

Hi I have a drawer slide, 2 metal pieces that slide over each other, with some kind of plastic piece that goes in between to stop metal from grinding against metal. The plastic piece has broken. On a different plastic piece I see Kenlin A10.

Hello, I am looking for a new dresser slide for my Thomasville Furniture Triple Dresser. The bearings and slide are missing. As such the drawer simply falls out when pulled.

I need 10 pair of these. The rail measures 7/8 inch by 3/8 inch (outside dimensions). The rail is approximately 2 inches from the cabinet back so if they could be 4-5 inches long that will be great. Otherwise I'll install a shim to meet the back cabinet wall.

Sorry there are no markings on this part. It is in a tract house kitchen from 1978. Kind of surprised it lasted this long ha! Thanks for your help-much appreciated.. Having trouble finding the proper size. Thanks for your help again...

Hi there. Quick question about this part. How deep is the tab that fits into the slot? It looks to be about 3/16 or 1/4 inch, but I'd appreciate if you could provide the precise depth.

Trying to order a part Grass dynamic nt drawer clip Maybe you number 33-336 Don't see how to order it Ca you help me Wil probably need a couple sets Thanks

I need a right rear drawer socket for Quaker Maid. There is a one inch gap in the socket.

One of those brown brackets that hold that front decorative piece on that shelf has broken and I've tried gluing it but it won't hold. Do you sell those brackets?

Middle rail on my dresser. That part's sits in the front as a guide for the drawer.about 1 and 7/8 long and about 1 1/8 wide and 11/16 high.

I cannot locate the white spacers used on the cabinet frame to secure the mounting of the slides

How do I remove the rail from back bracket. if I cant, can I remove the back bracket completely and get a full set to replace?

Trying to locate replacement hinges for Homecrest Cabinets built in 1988. No identifying marks are found on either the original hinges or the replacement hinges.In 2004, I purchased 18 replacement hinges through a local cabinetry shop (from Homecrest, I believe) and the only identification was a pa ... (cont.)

I have a dresser that needs a center mount track. I will need something that is close to the measurements so that the drawer is at the same height as the adjacent drawers. I don't mind shimming or installing something that will work. The guild is 16 3/4" long (as shown on attached pictures) so what ... (cont.)

Looking for this part.