Viewing all customer Discussions for:

Drawer & Cabinet

Original drawer slides are Unigrass 21 5/8", almond color. I would prefer to have replacements be the same almond color. Do youall have almond color, in addition to white? Thank you. Rusty

Do you have any handles with 4-1/2" between the screwhole centers? I know there's nothing like that on your site. See what you can do.

Our customer brought in this pull. His bedroom set is approx 25 years old. Would you have a replacement? There is a 4.5" space between drill holes. At the pivot point where handle rotates, the small piece of metal has broken off. Thank you. Betsy from Herman's Furniture, Avon Lake, OH ... (cont.)

This is replacement roller bearing which is covered with a black rubber washer 1 1/8 inch' for the outside diameter. This supports a 1/2 circle lazy susan type corner cupboard. St Charles cabinets.

please let me know if you have these Thanks Janet

Ronthor NYC adjustable shelf clip #1

I am trying to locate replacement hinges for my 1980s Woodmode cabinets that have Grass 823 hinges. They are exposed in the side of the door by a cutout.

Mepla cabinet door hinge approx. 22 years oldThe two hole, larger pocket plate is cast marked in each pocket , one side, 2 is cast, the other 698.256. 53. 00 .The hinge swing side is stamped 510. 356. 00. 13

Vendor unknown. House was built locally here in Sioux Falls in 1998. 2nd or 3rd owner. No identifying marks on any of the cabinets, drawers, etc. I've looked all over these cabinets for a cabinet makers name.

I am in need of replacement hinges for the "ice box" door on the chest shown in attached photo. I believe it possibly is Swisscom part number 32-338 with 3/8? offset. Are these or suitable alternative hinges still available? Thank you very much for your help!

Swisco Customer Service, Apparently each of the two existing brackets are slightly different sizes. The measurement of the NOT broken bracket (socket) is 1/2 inch wide by 1 inch tall. The measurement of the metal slider bracket that rests into the socket is 3/8 inch wide and 7/8 inch tall. Base ... (cont.)

In the attached picture is a hinge that I believe needs to be replaced as something was caught in it and now the door continues to swing out instead of staying shut. It looks similar to your WRAP AROUND FRAME CABINET COMPACT HINGE but you will note that the orientation of the half circle faces away ... (cont.)

Can't see any markings on the side mount glide. The broken back piece is 1 1/2" by 1 1/4". I didn't remove it from the back of the cabinet and hope you can identify it with what I have.

These blocks could not be matched at our local cabinet hardware supplier. They are approximately 1 1/8" tall, with no markings. If they are no longer manufactured, can the entire system be swapped, if so, how is it measured?

I am missing 3 parts for the drawer slide. Is it called a drawer socket? The attached photos show the left side, which has the bracket that is attached to the back of the cabinet, but is missing a plastic tube which slides onto the metal and then connects to the bracket. The right side is missing bo ... (cont.)

Trying to find replacement hinges Kingswood cabinets Looks like Mepla hinge 24 years old starting to fail

I need this part The markings say Ronthor Riess Corp. NYC. R-40-28 Pat no. 3,201,187 This is for a dresser drawer and the part is stapled to the drawer and glides over the track. I saw you have a couple of different parts that look close, but wasn't sure which one it was. The descripti ... (cont.)

Looking for glide wheels for an old Anderson Hickey filing cabinet. The axle is 6/32 of an inch i diameter. The wheel itself is an inch in diameter and 3/8 of an inch thick. Thanks for your help.

JCPenney home dresser.

I need to replace these on a dresser. The plastic guide runs along a wood slide. I want to purchase 4.