Viewing all customer Discussions for:

Other

need a replacement

Looking for a replacement swivel latch for a double hung window

I purchased 7D windows for my home 17 years ago and they came with full screens. Now I am faced with repairing the screen frames corners that have broken over the years. I would also like the pulls "D" rings and clips for the center rail. I have 17 windows in my home that all need some parts and ... (cont.)

Not sure what this part is called. All of my windows have all lost the ability to stay put. I attached one that I could indentify was broken but I'm unable to name it. Part of the shoe?

Outer case 2 7/16 x 1 3/16 x 1/2 inch Inner case 1 14/16 x 1 1/4 x 1/2 inch Roller diameter 1 1/4 inch

The Length is 22 inches, The Bulb is 1/4" I am looking for the closest replacement I can find. Thank You for your time and consideration. I sure hope you can help me.Steve

Hi! The pull is 4.375" to 4.5" center-to-center. It's probably called a 4.5". Do you have any of these pulls and knobs? If so, I'll need at least 5 pulls. If not, what do you have for a total replacement for a dresser, armoire, and two night stands? That would be 14 knobs and 10 pulls. I saw ... (cont.)

Hello. I need to replace this part for a sliding mirror door.

We have a Silver line brand window by Anderson. It is the right window locking mechanism. The plastic handle broke off the circle hole. The windows were installed in summer 2015 in Bucks County Pennsylvania by our builder. We urgently need to replace this part. Thank you.

I am trying to find replacements of this lock. I ordered 2 already but they were the wrong size. The length is 3 1/2" x 1" The distance between screw holes is 2 1/2"

Trying to figure out exactly what parts I need to replace the parts attached, that are located at the bottom of my window, acting as a pin and counterweight mechanism to keep the window open. My windows are manufactured by MI Windows.

Looking for Chanel balancer

Your part # 81-133 seems to be it. Just wanting to verify before ordering 4 of themGary

No numbers or markings. Approximately an eleven inch arm with a nipple on the end to hold a guide. I also need the guide. I think it's plastic thanks! Danny

Green

I posted tuis next to a new parker 461 we got at HD. The height is about 1/8 to 3/16 too high. it is also too long but there is room in the bottom moving rail. I believe a parker 358 is closer. Can you help? Thanks a million- Ed

Need new rollers

I don't know the official name of the piece I need. I'm looking for the "axel" that connects the indoor handle to the outdoor handle. In the attached photo, you can see the end has been twisted off, so I don't know how long I need , but probably 3"

Hello, I'm looking for the outer lockset for this window type

I am looking for a number of spring clips and channel balances for: Channel #28301 b.s.i. 30 inch bottom balance shoe is 1 1/4 in. wide. Window identification tag is DH - R30 Spring clips are 1 1/4 in. length and 1/4 inch wide. 4 pictures attached