Viewing all customer Discussions for:

Other

need help finding parts similar to OEM

These feet are for a pella replacement window sash.

It also has the name Pella on the end of the crank as well as a depth of almost 3/4 inch.

Looking for replacement for a 32435 hook up align keeper

Does not have to be an exact match, but something that will work in place of without having to replace the lockset. However, if the pricing is reasonable, i may elect to replace all the them (8) with new locksets and pulls.

what part number is this?

Numbers on the back of balances: 14 5 GX CMC 11. Sorry, the handyman removed the balances before I could take pictures of them installed. The balances measure 15" metal to metal, 16" plastic tab to tab. The balances are 17 years old. The string with the hook on the left-side window balance broke sud ... (cont.)

I need a new socket pair for one side of my old Merillat cabinet drawer. I believe it is a glue on type. Which pair do I need? And how do I get the old one off and put the new one on?

This part snaps into the back top portion of the drawer. The drawer then slides onto the rail that is top center mounted which slides through this piece which snaps into the top of the drawer.

The roller wheels ar 3/4 inch, screws are 1 5/8 inches apart. The adjustment no longer works. They have been hanging for about 22 years. #452 is engraved along with 3/4 rear, 1-3/8 front. Thank you for any help you are able to provide. John

I need to replace four (4) 31in. channel balances (9/16in) for my non-tilt sash windows. The stamped code reads as 30DS 35. I am assuming the 35 represents the sash weight which seems about right. Please could you verify which of 3030 or 3040 would be best to select when ordering. I do not have sc ... (cont.)

These are circa 1995 better built window, This part is old plastic and is very brittle. Have multiple one that have snapped in half

Good morning,I'm trying to identify this pivot shoe. The dimensions are 2 1/4" long, 1 1/4" wide, and 5/8" thick.ThanksBob

Hoping to find a replacement for this latch and locking mechanism. The overall length is 3 1/2 inches. It is on a Cole Sewell door. Thank you.

The hinges on my door do say Atrium. We're looking to convert to brushed nickel. Is that the swisco 82-399?

I need one of these please :):):

6236 pivot bar replacement

The window was manufactured by Jeld-wen in late 1999 or 2000. I need the left and right tilt latch. Please let me know if you need additional pictures.

So I have been able to determine that I have a 770 Series channel balance that is 23" but can't determine the weight rating on it. Can you please assist. Nick

3" tall1-3/4 inches wideScrew holes 2-1/2 inches on centerOutside handle is missing as well as the latch catch which should be mounted in the door track. House was built in 2015 by Insight Homes.Thanks.David