Viewing all customer Discussions for:

Other

Does this come in white and can it be removed without damaging the wood frame? Left and right handed?

There are no numbers on the inside only Patent Pending

I need several of them since they are all crack

looking for this type of glazing strip . it is a bit broken but the most intact piece i could get .. from what i have found looks like Kinro White Aluminum Window Glazing Bead .

My name is Ray. This is a old 1978 Likit sliding glass door 8 foot. Wheel supports are broken. do have a good replacement part roller assemblely.

Dom you have drawer 2D locking device DTC 533 drawer slide?

Outside dimension: 11 11/16" Width: 13/16" Mounting hole center to center: 10 15/16" Hook opening inside edges: 5 1/4" Latch rotator bottom to center: 4"

Wish to order 4 window balances as shown in photos. Length not including plastic parts is 29". Thank you. I have ordered parts from you in the past. Very satisfied with your product and service. Kevin Kelly

Unlabeled casement window. Pulled keepers off to paint, and misplaced. Please help identify

Looking for parts for my two sliding doors Air lite CMHC-5537 rollers, handles locks I hope you can help

The metal part is 27 inches long The stamped number is 2640

Springs hold sliding vinyl window panels in place. 2 springs on each panel. Measure 4inches long and approx. 1inch high.

Have these numbers on the side, the only set of numbers. Hopefully that makes sense to you!

I'm female so be gentle. House built 1993 and most of the top brackets are missing the stabilization screw for the top track. Need about 12 of these screws and local Lowe's unable to match. Any ideas? Marge

Need to order one

In need of a Alcan awning window crank with screws and snap rings. Can you help? Bob

I need a replacement top guide, similar to your part 86-025 but mine is only 7/8" wide that must slide into the frame. Im also looking for better rollers, I have 1 1/2" PLPCI.net D 1822 rollers, look like your 81-261 product but they are so noisy Is there a replacement that has poly wheels? I nee ... (cont.)

Can you help me find this glazing bead please?

The balance measures 24 inches not including the plastic ends. It also has a stamped number - 23-1 d.

Purchased the 82-087 Legacy Keyed Handle set and the 82-227 Mortise Lock 5- 3/8". I installed the handle set and lock. I can lock the door on the inside but on the outside the key will not turn far enough to lock the door. However; if the door is locked on the inside I can unlock it from the outsid ... (cont.)