Viewing all customer Discussions for:

Other

I am looking for a set of these, left and right. Mine are stripped out. Do they make these more durable?

I'm not completely sure which balance spring model would be an exact fit. The string on the pulley assembly snapped in half and I'd like to replace both sides.

Roughly 1/2 inch thick, 1" 1/4 wide and 1" 1/2 tall

Just need the handle

The length of the balance is 28" I will need 264 of them

Is there a coil housing that goes with this shoe? My current housing is 1.5" tall by 1.25" wide

Hello - We have a sliding glass door that has an Allen-Stevens handle with dark brown wood and a keyed lock. The door is 1" wide and the screws on the interior handle are about 3 5/16" apart. It appears that your part 82-003 is probably the right replacement handle, although the wood is a lighter br ... (cont.)

I posted earlier, but forgot to upload photos. I'm looking to replace these top sash guides. They're a left and right pair, with corresponding offset screw holes. For the measurements in the photos (in case they're not legible): height 1-7/16", top width 1-1/8", inner width 13/16", top depth 1". The ... (cont.)

Hello- I need a replacement handle and lock for my Pella sliding glass door. Photo of handle and numbers on door that I was able to find. your help is appreciated thank you

I need a part for Serial# 0453271 that looks like this, its just a little plastic part that keeps it in line when opening and closing.

Hello, the left and right of what's in this photo has broken. The area where the window post goes into is broken and will not rotate. Can these be replaced ?

Need a replacement

I don't know which replacement bracket to order. My original bracket is 30 years old.

Home built in 2000. Alenco is only brand visible on the window - on latch.

Window was manufater in 1997.

Looks Like luck into frame

I can't find anything like this. Do you have any or a suitable replacement?

Hi, I want to make my windows easier to operate and hoping you can help out. I have included some pictures. My windows are tilt in and are about 28 years old the brand was Patriot. Pictures show the balance is just shy of 27" and they are a 5/8" diameter.

I need to replace the 45º lever slot but the top and bottom needs to be rounded as i bought a replacement at Home Depot and unfortunately, although the overall dimensions are correct, it doesn't fit as it's square on the top and botton. The 2 outside screws are 3 11/16 and the inside height mea ... (cont.)

Having a hard time sourcing this older operator based on the screw holes Nunbers 07900 with a cursive W and design