Viewing all customer Discussions for:

Other

I looked everywhere and there are no numbers printed or etched. The balances are from around 2001. It measures 30 inches just the metal part and the window it lifts we believe is 40lb so I feel like it's a 29-2. I just can't identify the top and bottom pieces. Thanks for your help ... (cont.)

I need a handle of the door as it broke. Please let me know how we can obtain.

Truth. Later B No 45251

The side metal balance broke

See photo. The adjustment screw is on top. The screw that screws into the frame is on the bottom. We need two of these. Can you help?

These windows use 26-466 Pivot Bar, 2-1/4" and 15-177 Coil Balance Shoe, Slate Blue but can not find the coil spring holders. I have ordered the above from you folks and they work great but can not find the coil spring holders. thanks Henry

Part identified 7L

The picture shows a red insert, in the back . The cam is white/yellow from age. Have not found this exact match. This is on a small window, used in a bathroom. One frosted glass. I've ordered some of these before but all white which was used on a larger window.

Hi - I need to replace the window channel balances on 2 windows. I want to ensure I'm selecting the correct series - I understand how to select it, but to be honest, they all look very similar to me. Can you please advise? Thank you so much, Nichole

From metal end to end of Chanel 31 inches. The cordage broke.

This is a mirrored sliding closet door that is off its track. Sticker on the back of door says Renin 64564-001. Sending pics of both top and bottom rollers.

Needing to replace weather stripping

I am looking to purchase two pairs of channel balances, one set for my bathroom which are 17" in length and 1/2" width with code stamp 1610Z not shown in images but with exact same hardware as shown. And then another pair for my kitchen window that are 23" in length and 1/2" width with a code stamp ... (cont.)

How do I replace this?

Hi I need to replace some broken window vent latches, the dimensions are 2 inches tall by 1/2 inch wide.

I've tried about four different 31/2 inch handle and I can't seem to find the right size but finally found the manufacturer information I just need a sliding door handle replacement kit please help

I can't find a drawer slides big enough for my slides. I need about an 1 in or bigger slide socket.

If you can identify without removing, that would be great. I need to put this window back on for now, and am fearful that taking out the assemblies might break them further, making even temporary reinstall impossible. If you need addition pictures or numbers, I will get them for you. Thanks. ... (cont.)

need to replace the weather stripping on a anderson sliding door that is from the early 1990's

I just boutght a couple pairs of the Certainteed double hung window top tilt latches. 26-317 That is the latch that goes on the top of the top window, right.