Viewing all customer Discussions for:

Other

Hello. All the latches I found were too big... This one is 2.7'x0.7' x0.4'.....

Good day – I am looking for a white window sash latch replacement for Anderson windows. They are single hung windows

Top tilt latch

Hello any guidance on this part would be great thanks!

I'm not sure what else would work in place of these.. measurements are in the pictures.

Bottom roller for closet mirror sliding door

Need a couple of replacement Simonton window tilt latches that are broken.

Please help me fix my broken back door

Trying to find this window lock to replace broken one

Hi. I need help replacing a balance spring that broke. The only marking I can find on it is a 6 (or maybe a 9, see photo). Which part should I order? I have calipers and can take measurements if needed. When I weighed the sash, it was around 14 lbs, but I can weigh again if needed. ... (cont.)

Hello, I am repairing some windows in a house I just bought, the top windows would not stay up, I found that the metal bits in many of these shoes and many of the pins were broken or cracked. I need to replace them. I think the coil window shoe slate blues are appropriate replacements, need to make ... (cont.)

Is this your product? If so, I need to replace it.

how can I get a set of keys for Product Code: 40-039 Keyed Deadbolt

It's hard to definitively read the part number, but it looks like PAT 4810108, but the 4 could be an A and the first 8 could be a 6??

The balance shoes on the top window are broken. 3/4 inch opening in the slot.

I believe it's a KL-2000 handle for an old Sears door.

NO BRAND NAME FOUND ON THE WINDOW. Distance from top to screw hole center is 1-3/8 inch.Channel width is 9/16 inch. channel depth is approx 1/2 inch. Top of guide is 1/2 inch by 13/16 inch. Part is symetrical for right or left. Please see if you can match, or offer something I can make work. Th ... (cont.)

hi- I need a replacment crank for the attached photos. Thank you

Hi! I have an old door handle and latch lock that needs to be replaced. Below are pictures. It has two 3-inch centered holes and there is a hinge mechanism on top of the handle that slides over a latch which is attached to the outer edge of the steel door frame. The house was built in 1950. The new ... (cont.)

Need one replacement handle as shown in pictures