Viewing all customer Discussions for:

Other

White slide goes on bottom of drawer. It is 14 1/2 inches long, 2 1/4 inch wide and 5/8 inch deep. The second piece is screwed into the wood in the dresser. It is 15 inches long and 1 1/8 inches wide and 5/8 inch deep. I need more than one of the white one but not sure how many.

Attached is one of the pictures of a broken lift mechanism, however both need to be replaced. On the item attached the numbers that I can vaguely make out include 11600-1 116523587 11600-3

I have a hurd patio door that is missing the keeper. I see 2 possible parts that may match on your website. Can you tell which one matches?

I have been trying to get parts for my windows. Jody and Ben helped me identify the Side Load Balances I needed. Order number 962222. However, I still need the Sash Guides. Can you help identify. Please. Attached pictures.

my spiral balance tubes are plastic that covers the spring and blue tip. I cut back the plastic tube on one picture. do i measure the plastic tube that goes past the blue tip or from the steel spring below the blue tip. thanks Rich

Windows are simonton windows. Barcode # 3217814/0433.500059.5000LPSHWIF066929.500027.1875 Installed 6/14/02 I will need 2 of these parts Thanks. Sherri Gaines

Hi. I've attached photos of the caster that I need to repair my sliding glass doors. These are on a boat...1971 Grand Banks Laguna. I don't see any markings on the part. Can you please help me identify it? I'll need 6 of these. I have images of it installed into the door, also but I can ... (cont.)

I

I need a left hand side tilt latch

what track will fit your parts 21-214 and 23-020? I have 8' metal bifold doors that use 21-214 and 23-020. Need a track that will work with these parts. Will 21-402 work?

Do you have a replacement for this screen door pull?

Hi my name is Johnny and my house was build in 1980. window glazing bead needs to be replaced, all of them, I haven't calculate the total length but i will, just try to find the right seller first. please see attached photo and let me know if u need more information if you do have the party ... (cont.)

For the sliding window in my home, the Keeper part of the lock broke. What is the part number? Where can I get this from?

Info on side: 31 3 HX CMC 11

One of them has 26 3 FP Caldwell stamped on it. The aluminum part is 27 and an 1/8 long.

The assembly is stamped Production Enterprises. Hialeah FLI measure the unit as 11/16 wide, 1 & 1/2 inch high including roller 1 & 3/8 without roller.The unit measures 3 & 1/16 long. Y best guess would be it was installed approximately 1978. ThanksJack

Need plastic slide sockets for drawers post 1987. See photo #2 on quaker maid website .www.qmreplacements.com Advice? Available? Recently received order 959338 from you on 9/14 or so. Too small for drawer glide. Rear socket pair 32-018.

J9 8 31 3 69

I'm looking to build a wardrobe with bypass sliding doors from mirror and looking for a kit or pieces in brushed nickel. Need side track and top and bottom along with rollers-If there is a kit I will be in heaven! My door is 80 x 47

Hi - Would you know what these are? I need two white covers and one brown. Some are pretty stripped so ideally we could try a few handles as well. Thanks!!