Viewing all customer Discussions for:

Other

Dresser with broken wooden center drawer slide. Serial number is 185-236. I can send photos if needed. I would need to remove a working piece as the broken one was destroyed. Thank you.

This is a double door. If you are standing on the out side of the door and outside of the building than this is the door on the right with the hinge on the exterior of the building and swings to the outside. The bottom piece that guides the door is broken and as you can see is laying next to the doo ... (cont.)

It is the arm connecting the window locking lever to the window. It is use for securing the the window and lock the window tight. NOTE this is a new part that connects to a new window locking lever. Each window has two locking levers and two lockimg arms. The old arm was abount 8 inches long, 1 ... (cont.)

I need 4 of these. I think the part number is 4014X

Window handle for an old window

We broke a few balance shoes while cleaning the windows. What product should I order. I added a picture of the coil for reference as well. Only need 8 shoes.

Looking for the parts to fix my pella rolscreen handle and latch. The numbers on the back of these pieces say 777x, 777w, 777v and it's missing some of its original pieces.

Hi, I'm trying to find some replacement parts. They are rotating securing knobs for some 50 year old storm windows(pls see pics).You turn the small knob which rotated a lever to latch the window to the frame. Thanks!

I need new slider handles

Hi, I have a French patio door, only the left side moves, it swings in. This weatherstripping goes down the center between the two doors and mounts in a slot in a vertical wood piece that sits right where the two doors meet. The overall width with the curve mount is right about 7/8". The part with ... (cont.)

. I have a 22 year old Therma-Tru 8 foot double front door (picture below) My contractor pulled off my weather stripping and threw it away before he got the replacement and the replacement was to thick. The one he bought is to thick for the door to close. Can you please see if you have the smallest ... (cont.)

Need to buy a handle

Window Channel Balance, hope this is enough info and I need 4 of them... Thank you

Is this shoe 1 1/4" wide or is it the 1"

Wondered if you knew anything about these two seals The leaf seal is 1/2" high the bubble seal is 1/2" high I believe

I have a sliding glass door (doors)and the lock "flipper is damaged and I am not able to lock or unlock a locked door. The handle is 53/4 long. I put pictures on google and that is how this started. The flipper is 1 1/2". The opening in the door where the lock comes out and in with a flip is 1 3/8 ... (cont.)

I need a special order quote for the following balancers: Tilt window ribbed , Weathershield Total of 12- stamped 31TG with blue locking mechansim ( part 15-233 ) Total of 12- stamped 32TG with blu locking mechanism (part 15-233). Also are the balancers unpainted steel or can I get them in painted w ... (cont.)

Looking for a handle that goes on a little knob which opens window by turning the knob

What screw to use with SS Encore Awning Operator, Sill Mount Product Code: 39-239C? It looks like #8 5/8" wood screw with phillips flat head, but I'm not sure.

I want to replace my old EMTEK 322 lock. I like Satin nickel finish Which SWISCO lock should I buy and where can I get it?