Viewing all customer Discussions for:

Other

I am looking to replace both the handle and the cover for my crank Vetter windows, could you recommend a model? I also want the handle to be a folding handle. I will need two of these. The inside of the crank handle has the number 15 and below that the numbers 45054, hope that helps! ... (cont.)

I am looking for retainer strips for this door

Just checking if the nylon washers are included with the handle set. Thank you

The length of channel balance is 27inch, and the bottom guide measures 1inch with an imprint of 2640 on the channel balance. However, the bottom looks different from the picture of S380. Can you please help me idenitfy the appropriate channel balance model? Thank you!

PGT windows pvc double hung 3 1/4" series PVCDH6

I need to try and locate a window balancer for a window I have. Please refer to the images below. it is a non tilt The diameter appears to be 7/16" The length is 26" There is no tip, which I think is part of the problem.

I was trying to find replacements for these in you online store and don't have a clue where to start. These are builder grade windows to probably cheap,. but I don't know the manufacturer. I watched your video on how to remove the parts, but mine don't work that way. I would appreciate any hlep I ... (cont.)

Can you check to see if you have a window balance for a prism window and a pivot bar 3 1/4 inch

Looking to identify this gasket. Its a commercial door glass stop gasket

If you can identify this part I will order some.

I would appreciate any insights on how to remove this sliding glass door which needs to have rollers replaced. Thanks in advance

I am trying to replace a broken latch that has been discontinued.

Roller A - 2-5/16" B - ?" C - 1-1/16" D - same as A E - 1-½" I appreciate all help! I will need 12.

I already submitted a description - the blinds are catching on these old handles, so I need folding ones, 12 in all.

The one on the left is your PN 55-076. It is slightly different from the one I need and does not want to fit into the door frame.

Good morning! I have a customer that is trying to replace her lock set but we don't know the vendor. Can you take a look and see if it's familiar? Much appreciated! If you need any other info, please don't hesitate to reach out. I know that it is a 36 in door. We do need a new lockset. The o ... (cont.)

Are there replacement parts for this available? On the push toggle side, the catch is worn down And will not latch anymore.

There are no names or markers. Dimensions are: - 2 5/8 inches from edge of roller to edge of bracket - 1/2 inch wide - roller is 1 inch diameter

Hello, I am looking to source this door hinge. It is Hettich, and I ordered item # 23-161 from Swisco.com and the wheels were slightly larger than what I have uploaded in the post here. Looking for one that is closer to my size.

My name is Lorenzo and I am asking you about my door lock replacement. These are the pictures of it. Can you call me back with the replacement information if you have one? I am from Clinton NC.