Viewing all customer Discussions for:

Weatherization

I have a need for bash balances and weatherstripping and operator hardware for some casements for Weather Shield brand windows from 2000. The casement hardware was Truth brand 31850 and the balances have 32TG GL and are 2860 in size. Can you provide this hardware?

I would like to replace Pella casement window weatherseals throughout my home. windows are from 1989. The end view of seals from the sides and on the bottom and top are enclosed. Do you have a replacement product? Thanks

I understand the pile weathersipping but not sure what the pieces at the bottom of the movable pane and bottom of the immovable pane is called. Thanks for your help.

The rubber seal, brown in color consists of a bubble and an additional open end loop back. The bubble seals the left door against an overlap of the right door. The loop back is a compression of right left in plane w/ both. Attached are actual deteriorated seal and a rough sketch.Any help would be ap ... (cont.)

Hi, I need to replace the weather strip in the pictures. Do you have a replacement for this? It's for an exterior door. These are the measurements (as close as I could get them) Diameter: 3/8" Base: 11/16" wide Base ext: 1/4" (depth that goes in groove) Thanks. Al

I have Jeld-Wen Aluminum Clad Exterior with AuraLast Wood casement windows. I need to replace the sealss around the edges, all 4 sides, of the window.

I'm looking for weatherstripping parts. The piece that goes between the window where they meet when closed and the piece that seals the window at the bottom. I believe the windows are Marvin and original to when the home was built in 1992. I found numbers on the inside of the window and submitting ... (cont.)

I have Milgard French Doors, and weatherstrip 58-173 has the correct shape and dimensions. My door lengths are 93" and I see you offer 82" only? Are you able to trim longer pieces or is there a better solution for these doors? thanks

Hi there Do you have weather strip similar to that picture ? If you don't have it, do you have something close to that picture. Thank you

Like to soft get soft close drawer slides the length from back of cabinet to front is 22 3/4 any additional info needed just let me know

I'm looking for some pile weather stripping with a 7/32 fin and a 1/2 to 5/8 pile height. The groove the fine slides into measures .228 wide and I'm afraid your 3/16 fin by 5/8 pile weather stripping may fit to loose and fall out or pull out of the track it slides into. Any thoughts on what you ma ... (cont.)

I have 20 year old vinyl single-hung windows without any labels, but most likely American Craftsman. I found the wool weatherstripping for the top and side edges of the window, but the bottom one is so degraded on most of the windows, it's hard to find a reasonable sample to go off of. I did find th ... (cont.)

We are looking to replace the pile weatherstripping on two sliding glass exterior doors. We are sending photos of the dimensions of the Existing material. Can you recommend what size pile weatherstripping we would need?

Snap in window beading for horizontal sliding windows 1/2 " by 1/2"

Bottom weather strip, no markings, Double fins on one side that inserts into window. Insert portion appears to be 1/4". Hard time locating a match.

Sliding glass door original to House 1969 72 inches wide 80 inches highThin insulation needed around sliding glass doors or whatever you suggest sliding glass door is

I have a window weather strip from a house made in 1997. Can you help me identify this seal in picture? The seal is cut on an angle.

Rain drip on bottom of window is exposed to the sun and it curled up and is coming off of the window.

we have 20 doors that need new weatherstrip at our church

I would like information on Lincoln Windows weather stripping replacement. The windows are double hung 35 years old.