Viewing all customer Discussions for:

Weatherization

Hi, the rubber weather strip that runs along the bottom of lower window is decayed. Any way I can replace that part? Picture attached.

Hello Swisco, Do you guys carry this type of weather stripping for my front door? Thank you for your help, Sergio

This is weatherstripping that pushes into a groove around my 2 crankout rectangular kitchen windows. This is Certainteed window installed when I had the home built approx 19 years ago.

This is the seal on the sliding door. It slides next to the bubble seal that is attached to the frame of the door. The "bubble" on the seal of the door itself is very tiny, but as you can see at the bottom, the bubble is damage to it doesn't seal well. Im wondering if you sell a replacement? ... (cont.)

Please help me out to identify this weather strip, it goes on top of the exterior doors, if not the same at least a replacement part. Thanks

My old casement window has two seals: a bubble type that goes into a kerf cut in the frame, before the stop (gray picture) and another seal was in a kerf cut into the sash that had the white strip. I could not find any identifying markings on the the window or frame. I have an idea of what I need bu ... (cont.)

1/4" fin x 3/8" knap x 7' long Fin = white plastic that slides into the door or kerf Knap = black hair that protrudes from the Fin and seals the door Looking to match what we have, we have 5 or so doors that need new weather stripping.

I wish to find a replacement for the weather strip (rain strip) on a Pella casement window. It is a bit smaller then the 58-178 referenced other posts. I have attached pictures with a scale for dimensions. It is a kerf style strip. The window is about 15 years old, but I notice the same strip is on ... (cont.)

I am looking for weatherstripping like this for a CMI Architectural bronze door, the width measures 1" Thank you, Laurie

Hello, we need help finding replacement weather stripping for our sliding door. It is kerf mounted to the door frame. We tried the foam filled ones and they are too big and they don't allow the door to lock once they are installed. If you need more pictures let me know. Thank you in advance for you ... (cont.)

Hi, Can you help me with weatherstripping for my windows. There maybe two different types, but I am not sure.

The weather stripping on my 3 of my casement windows have disintegrated from the weather and need to be replaced. Each of them are 62" x 18". The windows were made by Republic windows. Just wondering if you have any kind of weatherstripping that would fit. Thank you, Carol

Looking for replacement weatherstripping for my wood windows. They are 19 years old. The weatherstripping is about 1/2" wide

Good afternoon. I have a home built in 2001 with contractor grade double hung windows. I do not know the manufacturer. I need to replace window seals on the bottom of the window. Attached are photos of the existing seal. Note that the window seal appears to be a T-slot foam filled bulb weather ... (cont.)

It snaps up in bottom of door from 2009 heartland Sundance fifth wheel

Looking for parts simonton windows

I'm looking for about 30 ' of weather strip. Picture is attachef

Hi, I need to replace window weatherstripping. The windows are original to the house built in 1986. I don't know the window brand. The newer screens are Anderson.Sheila

I'm fixing 12 Milgard vertical sliders, 11 are 30"L x 34"W (18.2 lbs.) and 1 is 30"L x 22"W. The smaller window has 2630V stamped on the channel balance. I did not see a number on the channel balance for the larger sliders but the style is the same. I will look tonight on the balances on another win ... (cont.)

I was told by a Larson sales rep that I have a Peachtree metal entry door. It was installed in the summer of 1983. I need to replace the weatherstrip on the hinged side and the top. The hinged side is a compression strip; the top and latch side are magnetic. The kerf is 1/2" deep and 3/16" wide. I ... (cont.)