Viewing all customer Discussions for:

Weatherization

Hello, we need help finding replacement weather stripping for our sliding door. It is kerf mounted to the door frame. We tried the foam filled ones and they are too big and they don't allow the door to lock once they are installed. If you need more pictures let me know. Thank you in advance for you ... (cont.)

Hi, Can you help me with weatherstripping for my windows. There maybe two different types, but I am not sure.

The weather stripping on my 3 of my casement windows have disintegrated from the weather and need to be replaced. Each of them are 62" x 18". The windows were made by Republic windows. Just wondering if you have any kind of weatherstripping that would fit. Thank you, Carol

Looking for replacement weatherstripping for my wood windows. They are 19 years old. The weatherstripping is about 1/2" wide

Good afternoon. I have a home built in 2001 with contractor grade double hung windows. I do not know the manufacturer. I need to replace window seals on the bottom of the window. Attached are photos of the existing seal. Note that the window seal appears to be a T-slot foam filled bulb weather ... (cont.)

It snaps up in bottom of door from 2009 heartland Sundance fifth wheel

Looking for parts simonton windows

I'm looking for about 30 ' of weather strip. Picture is attachef

Hi, I need to replace window weatherstripping. The windows are original to the house built in 1986. I don't know the window brand. The newer screens are Anderson.Sheila

I'm fixing 12 Milgard vertical sliders, 11 are 30"L x 34"W (18.2 lbs.) and 1 is 30"L x 22"W. The smaller window has 2630V stamped on the channel balance. I did not see a number on the channel balance for the larger sliders but the style is the same. I will look tonight on the balances on another win ... (cont.)

I was told by a Larson sales rep that I have a Peachtree metal entry door. It was installed in the summer of 1983. I need to replace the weatherstrip on the hinged side and the top. The hinged side is a compression strip; the top and latch side are magnetic. The kerf is 1/2" deep and 3/16" wide. I ... (cont.)

Hi! I'm having trouble locating this exterior door weather stripping. Door is only about 25 years old. Also are your window balances painted white or uncoated steel? Thanks!!!

This is like md door sweep part # 5329818 / 67967. It is 42mm wide (1 5/8) 97mm (35 3/4) long. The ribs that go in the groves in the door bottom are approx 30 mm apart. I can not find any markings at all on the part.

Side seal to a wood casement window. This seal has two grooves in the wood frame and the seal itself is torn off and not in the photo. I can't seem to find a seal with this track.

Total window length appears around 46 1/2 23"x551/2" each pane

I have a 32 inch solid exterior door. Do you have a 58-189 in 32 inches?

Hi, I need a replacement door sweep for a SwRI I.D. No. 98038-05-01. Is part number 58-189 the correct part number? Thanks in advance!

This is off of an older Pella sliding door. Can you give me any help on a replacement?

This is some weather stripping around some windows I think it's a draft stop the windows I think from the mid 80s any help would be great . Thank youBob

I need two 8'weather stripping for a Morgan Double door.The dimension of the weather stripping are kerf 1/2" height 1/2" width 1 3/8"about doors 1 3/4"thick .