Viewing all customer Discussions for:

Weatherization

Good afternoon. I have a home built in 2001 with contractor grade double hung windows. I do not know the manufacturer. I need to replace window seals on the bottom of the window. Attached are photos of the existing seal. Note that the window seal appears to be a T-slot foam filled bulb weather ... (cont.)

It snaps up in bottom of door from 2009 heartland Sundance fifth wheel

Looking for parts simonton windows

I'm looking for about 30 ' of weather strip. Picture is attachef

Hi, I need to replace window weatherstripping. The windows are original to the house built in 1986. I don't know the window brand. The newer screens are Anderson.Sheila

I'm fixing 12 Milgard vertical sliders, 11 are 30"L x 34"W (18.2 lbs.) and 1 is 30"L x 22"W. The smaller window has 2630V stamped on the channel balance. I did not see a number on the channel balance for the larger sliders but the style is the same. I will look tonight on the balances on another win ... (cont.)

I was told by a Larson sales rep that I have a Peachtree metal entry door. It was installed in the summer of 1983. I need to replace the weatherstrip on the hinged side and the top. The hinged side is a compression strip; the top and latch side are magnetic. The kerf is 1/2" deep and 3/16" wide. I ... (cont.)

Hi! I'm having trouble locating this exterior door weather stripping. Door is only about 25 years old. Also are your window balances painted white or uncoated steel? Thanks!!!

This is like md door sweep part # 5329818 / 67967. It is 42mm wide (1 5/8) 97mm (35 3/4) long. The ribs that go in the groves in the door bottom are approx 30 mm apart. I can not find any markings at all on the part.

Side seal to a wood casement window. This seal has two grooves in the wood frame and the seal itself is torn off and not in the photo. I can't seem to find a seal with this track.

Total window length appears around 46 1/2 23"x551/2" each pane

I have a 32 inch solid exterior door. Do you have a 58-189 in 32 inches?

Hi, I need a replacement door sweep for a SwRI I.D. No. 98038-05-01. Is part number 58-189 the correct part number? Thanks in advance!

This is off of an older Pella sliding door. Can you give me any help on a replacement?

This is some weather stripping around some windows I think it's a draft stop the windows I think from the mid 80s any help would be great . Thank youBob

I need two 8'weather stripping for a Morgan Double door.The dimension of the weather stripping are kerf 1/2" height 1/2" width 1 3/8"about doors 1 3/4"thick .

I am looking for weather stripping for a kvw window that was install around 2003. Please let me know what part you think will work. Thanks

Hi, I need to replace what I think is called the pile weather sweep/stripping on a 15 year old patio door. It runs vertically along the one side of screen door. It is brittle and starting to break off as we open and close the screen door. I?ve included a picture below. The door is 76?. On the g ... (cont.)

I pryed this window seal off the bottom of the replacement window. I couldn't slide it out without taking apart the window. It's for the bottom of the window where it touches the sill. Is there anything I can use to replace it? Do you have any videos showing how?

Has anyone had any luck finding a weatherstrip that works in a Pella casement window. Trying to find the correct replacement is proving almost impossible.