Viewing all customer Discussions for:

Weatherization

I am looking for a replacement weather seal for my Windsor double hung windows. It fits into a slot on the bottom of the window to prevent bugs and water from getting in underneath the window. The house was built around 2003. Thank you! Jenny

Looking for correct / replacement weatherstrip for Patriot 1800 series vinyl windows. It is a T slot with foam bulb but has flanges on the bulb portion. Example pic is the best I could find as all have deteriorated and crumbling.

Looking to replace some worn weather stripping Can you help

Do you have a product that can replace this seal in a Pella window? The Pella part number is OCMO 0001 and I would prefer if possible to buy the parts from your company and not PellaPlease adviseSteve

This window seal is on casement windows that have no manufacturer identification. The crank and hinge manufacturer is Truth. The insert portion of the seal is square and fairly ridged. It measures 1/4-5/16 on the flat side which goes in the groove on the frame.

Having a hard time finding this, was referred to you

Need replacement for outside jam and interlock. I do not know the model of the Anderson sliding patio door. The door is 6'8" tall . Can you help?

Hi, the rubber weather strip that runs along the bottom of lower window is decayed. Any way I can replace that part? Picture attached.

Hello Swisco, Do you guys carry this type of weather stripping for my front door? Thank you for your help, Sergio

This is weatherstripping that pushes into a groove around my 2 crankout rectangular kitchen windows. This is Certainteed window installed when I had the home built approx 19 years ago.

This is the seal on the sliding door. It slides next to the bubble seal that is attached to the frame of the door. The "bubble" on the seal of the door itself is very tiny, but as you can see at the bottom, the bubble is damage to it doesn't seal well. Im wondering if you sell a replacement? ... (cont.)

Please help me out to identify this weather strip, it goes on top of the exterior doors, if not the same at least a replacement part. Thanks

My old casement window has two seals: a bubble type that goes into a kerf cut in the frame, before the stop (gray picture) and another seal was in a kerf cut into the sash that had the white strip. I could not find any identifying markings on the the window or frame. I have an idea of what I need bu ... (cont.)

1/4" fin x 3/8" knap x 7' long Fin = white plastic that slides into the door or kerf Knap = black hair that protrudes from the Fin and seals the door Looking to match what we have, we have 5 or so doors that need new weather stripping.

I wish to find a replacement for the weather strip (rain strip) on a Pella casement window. It is a bit smaller then the 58-178 referenced other posts. I have attached pictures with a scale for dimensions. It is a kerf style strip. The window is about 15 years old, but I notice the same strip is on ... (cont.)

I am looking for weatherstripping like this for a CMI Architectural bronze door, the width measures 1" Thank you, Laurie

Hello, we need help finding replacement weather stripping for our sliding door. It is kerf mounted to the door frame. We tried the foam filled ones and they are too big and they don't allow the door to lock once they are installed. If you need more pictures let me know. Thank you in advance for you ... (cont.)

Hi, Can you help me with weatherstripping for my windows. There maybe two different types, but I am not sure.

The weather stripping on my 3 of my casement windows have disintegrated from the weather and need to be replaced. Each of them are 62" x 18". The windows were made by Republic windows. Just wondering if you have any kind of weatherstripping that would fit. Thank you, Carol

Looking for replacement weatherstripping for my wood windows. They are 19 years old. The weatherstripping is about 1/2" wide