Viewing all customer Discussions for:

Weatherization

Looking for this window bead and seal

This is the profile of a Milgard, Woodclad, Woodcore, 2006, Double French Door, Inswinging. It is the strip that goes around the whole frame. I have 2 sets of double french doors and 1 single door with the same stripping facing west, where rain storms and sun come from. It seems like the sun melted ... (cont.)

Could you please tell me what this sweep is made from. I've been told the vinyl doesn't last long. Thank you!

Looking for a replacement sweep

Cold air penetrates though the bottom of closed sliding door. It looks like the insulation material might be installed incorrectly or missing. What can i do about it? The door is a Coradco "Manor clad wood bi-parting patio door". Thanks for your attentin to the matter.

mohair with fin backing on it

the doors are aluminum and there is 2 the brand is YKK ap the weather strip is 4546"x 1 1/2 thick the felt is on one plate but they are located on the inner and outer edge

Do you have the weather stripping that works with this style commercial metal door? We have replaced the upper and lower weather stripping but still need replacement at the lock area. Thank you for your assistance.

Hello, Please help identify a replacement for the sketch of my bubble seal. Color is white. Thank you Corey

Hello I am the Gm of Hotel looking to find the closest replacement for weather stripping for close to 55 exterior taccin doors. Taccin no longer produces what I need and I am hoping you have something close. Possibly your 58-008 or your 58.171 will work?

We have Windsor Windows. Many of our windows need replacement weather stripping. The windows are approximately 15 years old and the original weather stripping is loose and falling off of the windows, bottom sashes. From your illustrations, I believe the correct weather stripping replacement is ". ... (cont.)

I need weather stripping for a Amarlite door. Do you have this item in stock? If so, please email me. Thank you. See photos for image.

I have American Craftsman 8500 series. The slide in weather stripping had degraded. The seal is white plastic 3/16 wide where it sits in the slot on top of screen. The brush sits at 90 degrees and rides against the window frame.

This is on a sliding door with two interlocking strips o. Both sides 1 34" wide. Do you have anything like that

Appears to have originally been held on by a self-adhesive strip.

I just replace the felt and rubber strip on my first window. all of them were locked in with 3 chisel marks tapped in the felt and rubber strips to lock the old strips in place. what is a good and not too time consuming way to lift or file those back open so I can slide in the replacement material? ... (cont.)

The pile in my windows appear to be crimped into the frame. Is this a normal scenario?

I am trying to find the weatherstripping for double doors manufactured by Extrudart Metal Products of NJ. back in 1981 of which we have three sets on our local church. I only have "vague" information as to what I believe is the model number as "Model L, vision light, bronze" and or possibly called ... (cont.)

I am looking for a pile weatherstripping with a full 1/2" backing and 3/8"-7/16" pile height. We have tried 7/16" backing, but it will not lock in the groove and falls out.Pat