Viewing all customer Discussions for:

Weatherization

I have a window that needs a replacement weatherstrip seal. It is a MW window 3X4 (PlyGem Rocky Mount Va) Their part number is 52286 piece lock. What is your part number. There are several windows that need new weatherstrip seal on the bottom sash. Does it come by the foot or by section? ... (cont.)

I was wondering if you could recommend a replacement part for a 1940

Need to replace wool pile gasket on my 1996 Certainteed windows.

kawneer made the i-line door until the late 80's.. any replacement or reto that you might know of for the plastic pile holder?

I bought 2 rolls of the 5/16 kerf mount weqtherstripping to repair 17 year old Caradco windows in my house. It is an exact match to the original but I am unclear how to get it seated properly in the slot on the bottom of the bottom window without being able to remove the window. The window has a l ... (cont.)

Im looking to replaced the white plastic seal around my windows if possible. The info I got from the window is: CODE CPM;RATING H-R35; SERIES 40 Aluminum SH; MST 3870/4060. Please let me know how and where I can get the replacements for my windows. I need it for seven (7) windows. Thanks ... (cont.)

Hello, this is the door that was installed when the house was built in 2004. It is the door that leads from the garage into the house. I need to replace the door sweep on the bottom of the door and this is the door number Premdor H461528. Do you have a door sweep that would fit this door? ... (cont.)

I have 12 Alenco Windows circa 1996. All are in need of new weather stripping. They are 36"w X 72"h. The bubble weather strip is 3/8"dia. (see Photos)

I have 18 year old Stanley exterior doors and would like to get new weather stripping. The problem is there is a very wide gap and the weather stripping must have the correct "tongue" to insert into the gap so that it stays. Is there anything like in the attached picture available? Thanks ... (cont.)

Your Swinging Door Compression Foam Seal, Large - Product Code: 58-201. This seal has a 5/32" kerf. Do you have a similar seal with a 1/4" kerf? If not, can you point me in the right direction? Thank you.

I need some replacement astragal material as shown in picture. Thanks, Troy

I need the insulation that slides into what looks a double groove on the side (actually both sides) of the window. My windows are white,so the insulation would also need to be the same color. This is the information from one of the stickers: NAMI,NFRC 100/200 CODE:PAT(VA) SPEC:NEED SERIES:BM ... (cont.)

I ordered 58-171 weather stripping from there but it is not the size I need. Can you look at the pictures and let me know the correct number I need. Thank you for any assistance you can give me.

Door is 8

40 year old pella sliding glass doors in great shape except for weather stripping seals. Need vertical beige plastic strips on jams, I saw one on your website, but it

My Nu Prime vinyl windows are approximately 30 years old. I am looking to replace the side and bottom weather stripping (seals) on all 10 windows. The photos attached are the best I could get. The channel for the side strip mountings are approximately 1/4" wide. The channel for the bottom strip ... (cont.)

Can you provide a replacement for the wool seal in the picture. It is a standard 80" sliding door. B/r TM

Hello! I am looking for replacement weatherstripping for a 1992 Jeld Wen window. Any color. Thank you Vanessa

Attached is the weather strip for my entry door that are worn out. I would prefer varying options. Thank you.

My window has a small grove for the weather stripping, not sure what to buy, I think it's the same one on your video.