Viewing all customer Discussions for:

Weatherization

Sliding door in los altos hills

Windows were made by MI in 2009 for previous owner. Attached is a small section I salvaged shown in two pix. One is the face on view as it would look installed at the bottom on the sash in the groove. The other is the cross section. Rulers should help with identification. Thanks Vince ... (cont.)

The door name is Kawneer, has the double wool screen on both doors, 1/2 inch wide, about 83 long, the doors were installed around 1978. Do you need anything else?

I purchased a home that is missing weatherstripping in the lower sill of the sliding doors. All the doors and windows appear to be the same manufacturer because they have similar number sequences in-between the window panes, but I cannot determine what manufacturer they are. The first two photos ... (cont.)

Does this sweep come in white? Does it come in gray?

I need a replacement vinyl sweep for my storm door. I have tried replacing, but the 1/4" T is too small for the slot and can't seem to find anything with a larger T. I have measured the slot to be either 5/16" or 3/8" Tristan

Hi My name is jose From the glass nook I'm trying to find this window snap bead could you help?

Can

Do you have a part that is like the 58-050 but would have the dimensions of 7/16 wide but only 1/4 or 5/16 thick? The double doors we have are close to 40 years old.

Hi Swisco, I have purchased window springs from you in the past. I am hoping you can help me find these window gaskets/seals. It is a round tube which I believe is 1/4" in diameter and the double ribbed is another 1/4". The ribbed part that fits into the window is 3/16" with a 1/16" attachment ... (cont.)

Hello, here attached I have images of weather stripping, 3 different pieces I need at least 50-100FT each of or what quantity they are sold in please specify. Please provide a quote for resale price and availability on all 3 types if possible, thank you.

Trying to ID this part for my patio door. The only marking is on the door handle and says "K/K" on it and I believe it is a Kolbe door. The door is a inward swing type and the part is a piece of plastic that screws to the underside of the door and holds the weather stripping. It's (34.5 in x 1.5 in) ... (cont.)

I'll need about 19 feet of rubber gasket replacement, if you can identify the material from the attached photos. You see the cross section is just about 1" wide, and you see the gasket installed in the door frame. There's a groove that runs all the way around the door to hold the rubber gasket. ... (cont.)

These Anderson Casement Windows were installed in approximately 1969. I could not find any identifying marks on them. I am including the best pictures I could get of the seals. The window box has seals on both sides and the top. The window itself has a seal on the bottom of the window. ... (cont.)

Goes all around a casement window. needs to have the groove side. Grooved section is 1/4 wide x 1/4 " tube

I need to find the correct weather stripping. We ordered one but it was too big and a little off of what we need. Any help would be appreciated. Thanks

This is a Thermal Gard casement, I

I have a wood Kolbe and Kolbe french door and I need to replace its bottom weather stripping. Please identify what we need? Thank you.

the bottom white is 3/16" x 1/4" black pile I will need about 500' there is no numbers

Can you help me replace this wool pile it is 3/8" wide by 5/8" tall