Viewing all customer Discussions for:

Weatherization

I have what I believe to be a Caradco 6 foot 1 fixed one moving patio door that has 4 hinges on it. I have attached pictures of the existing weather stripping and the bottom door sweep. Due to the cost of this weather stripping and shipping cost I would like to have you review my pictures an ... (cont.)

As you can see my weather stripping is very worn. The base is 1/2" wide, and the pile needs to be 3/8" or thicker. It is a wool pile style weather stripping.

as the window is closed, it makes contact with bottom of frame. There is a gap at that bottom of the window. The bottom gasket is broken or missing. How do I go about fixing that?

Can you tell me how wide the metal flange is? # 58-169 It looks just like what we have; want to make sure before ordering. Thanks

Hello! The bubble seal at the bottom of our window sashes has shrunk and hardened with age. We are already repairing $1500.00 of water damage in our kitchen's bay window, so I need to replace the bubble seal in all of the windows in the house. The bubble is approx. 1/4 inch in diameter, and ha ... (cont.)

Snaps into 1 1/2 in door cavity.

sorry im a novice to home repair.. hope the pictures help to determine the size i need...thanks for any info

I need to replace some kerf seals in a few exterior doors--they've been mangled by a cat we used to have. I've attached a photo of a cross section sample of what I need. It looks like you have the part I need (If you have beige), from looking at pictures on your web site, but I want to be sure t ... (cont.)

I am looking for two types of stripping from what i beleive is a dyke industries replacement window. The top is a small bubble and the bottom has a hard spline perpendictular to the bard before the bubble.

Please see attached pictures below of glazing I need to replace on my home due to dry rot and cracking. Light gray, please see photo for dimensions:

Need replacement glass stop seal vistawall

I think the windows are Mi Windows.Cannot find tags on the windows. Home was built in 2001 I think .187 T-SLOT OFFSET HOLLOW FOAM SEAL,12FT Product Code: 58-183 will work but not sure.

The weather seal is held in a saw kerf in the edge of the window for the wool style and in the top or bottom for the tube style. We bought these wood, double hung, 8 over 8, single pane windows from Horner Millworks in Somerset MA in 2001.

I have hard time find this bug seal for my screen door.

Please suggest a weather strip for insulation between doors

At our choosing unit we have been trying to replace the weather stripping on our exterior steel clad doors. I recently purchased some " magnetic "weather stripping from Amazon but it wasn't thick enough so when I replaced the old stuff there was a gap of about 1/8" that rendered it useless. As a f ... (cont.)

The wool on our weather strip is completely worn out and needs to be replaced. I've taken a few pictures to help identify what kind of weather strip we have and hope you can point me in the right direction for what we need to buy. Thank you

3/8" wide across bottom ot strip (base) and 0.028 thick Pile is worn but measures 1/2" high Doors are 20 years old installed in an industrial; facility with no information available

Hello, I

I am looking for a bulb style seal to replace my old vee flap seals on my crank out windows. What do I need to provide as far as numbers to order seals. John