Viewing all customer Discussions for:

Weatherization

Can you please let me know if you have weatherstripping to replace that pictured in the attached?

Hello, I've attached some pictures of the door and my business shop. Per the health department, I need to get the door gap closed and have enclosed some pictures. Could you please advise as to what may be the best to get he gap closed? We also need to replace the sweep on the bottom. Thank you! Laur ... (cont.)

Renovating townhouse built about 1995. Steel entry door in descent condition, but needs new compression kerf type weather stripping around jamb behind stop. Problem is kerf slot behind stop is almost 1/4" wide. Existing weather strip has 1/4" beaded kerf. Unable to find a replacement with kerf this ... (cont.)

Looking for weather strip for this door from hr.

I built this house myself in 1986.

Good Afternoon, I am attaching 2 pictures of the weather strip on the bottom of my windows. I am also attaching a picture of a nameplate on the window. I am trying to find out which size t-slot I need to buy. I have 28 windows and they all need to have the weatherstrip replaced. Thank You, Chris ... (cont.)

Original weatherstrip from about 1997 has compressed and does not seal. See attached Visions 2000 catalog page for original part ID. Trying to identify a replacement. ... Bill

looking for the wool pile weather stripping. A piece of it is damaged on my Pella Storm Door. See the Pics. Can you tell me which product you have that I can replace with. Thanks

Hi- Can you tell which seals (bubble) I need by the original model number? I have MW DUAL built in 1992 wood windows with bubble seals. Thanks in advance, Tank

The seals have dried out on several windows that get alot of use Do you have a seal that could replace them? Thank you

Hi, the first picture is weather strip for 7 kolbe french doors, and the second picture is of a totally inadequate sweep for a 44" custom door. The 44" door is 1-3/4", the gap at bottom is about 1/2" Do you have something for these? Thank you

I am looking for weather stripping for an Old Castle brand double doors. the crease where it fits is 3/16" wide and the brush part sticks out 1/2". do you have a part number for this

HERE YOU GO: good luck Water bar weatherstrip is located on the top of the sash and keeps water from accumulating on the top of the sash and moves the water to the side sash exteriorto drain. Mine is hard plastic looks black in color (dark gray ). Everyone ofthe windows have the corners all smash ... (cont.)

Comercial Double door

Stripping from bottom and top of vinyl tech glass doors. Create new post

I have enclose cross section of the existing weatherstrip. Measurements: Basewidth: 3/16" (bottom of plastic T-shape insert) Total Height: 3/8" Foam buble: 1/4" diameter Bottom of upside plastic T to buble: 1/8" Possible match: Product code: 58-156 Please advise. Do you have samples? ... (cont.)

The windows were installed in 1990. I believe this strip is a 5/16 hollow bulb.

Any idea where I can get these types of beads! Rubber!

I need a new weather strip for my screen door. Inside strip has the following information: Warranty REG# Do Not Remove C0208032-4111309 18 COMFORT-BILT Do you carry this part or know where I could get it? Thanks, Mary

I wanted to know if this was the 55-106 or would work for.