Viewing all customer Discussions for:

Weatherization

I am looking for a replacement for this type of T-channel bulb weather seal. The width of the backing is 5mm, and the height of the bulb measured from the base in cross section is about 6mm. Will need about 18 ft. This is a casement window with hurricane glass. Thanks!!

The end that sticks into the slot is 5/16" long The large bubble is 3/8" diameter The small flap is also 5/16" Am looking to replace about 7 doors with this weatherstripping. Thanks a ton for your help.

Hi, I have an MI window in need of replacement trim that warped in the sun. The numbers on the window are 16352847-7 & 865. I tried to submit in your form twice but it did not work. Pictures attached. The piece is 16

Hi, I need some help! Two things. one is I'm concerned about my measurements on the weather strip because the sun and weather has shrunk the materials ... so here's what I get 3/16 x 3/8. see photos. My next concern is installation. I don't see a way to feed the new striping in the cannels.(see phot ... (cont.)

IGCC CBAE4igmACcig-2-99 I need to replace the Fin Seal thank you

Do you have this?

For an old steel Perma Door. Squashed so measurement are inaccurate. Width is 3/8". Height is 5/8". What material is the gasket made of?

I have a neo round corner shower And missing the door seal strips How much would 4 strips cost. Also need a magnetic strip.

Hey Dave. Do you have anything that could replace this? I

Similar but wider than your part # 58-068 and 58-168. Do you have or know where I can get a brown replacement for the threshold insert that is 1 3/4 inches wide or 2 inches wide? Your parts are 1 1/2 inch wide and I bought one from Home Depot and it is too small and leaves a gap under door when inst ... (cont.)

Hi, I am a homeowner in New Hope, PA needing to replace some weatherstripping that has aged and is falling out of the grooves of my 20 year old aluminum casement windows. I bought the house used, so I don't know what brand of windows they are and no window repair company that has come to my home is ... (cont.)

Am looking for this type of bottom window gasket, believe its 1/4

The is a strip around the frame of the door with a slot, where this weatherstripping fits into. We are looking for about 500ft to replace the stripping on all doors of our commercial building

Need help identifying weather strip for a door

Im looking for weather stripping for my semco double hung windows. It sits between sashes. Seems to push into slot to install. See my picks.

Please help me locate this. Thank you. Ryan M

This is a weather seal that seals between 2 glass doors- the manufacturer is amaralite

I have what I believe to be a Caradco 6 foot 1 fixed one moving patio door that has 4 hinges on it. I have attached pictures of the existing weather stripping and the bottom door sweep. Due to the cost of this weather stripping and shipping cost I would like to have you review my pictures an ... (cont.)

As you can see my weather stripping is very worn. The base is 1/2" wide, and the pile needs to be 3/8" or thicker. It is a wool pile style weather stripping.

as the window is closed, it makes contact with bottom of frame. There is a gap at that bottom of the window. The bottom gasket is broken or missing. How do I go about fixing that?