Viewing all customer Discussions for:

Weatherization

Do you have a part that is like the 58-050 but would have the dimensions of 7/16 wide but only 1/4 or 5/16 thick? The double doors we have are close to 40 years old.

Hi Swisco, I have purchased window springs from you in the past. I am hoping you can help me find these window gaskets/seals. It is a round tube which I believe is 1/4" in diameter and the double ribbed is another 1/4". The ribbed part that fits into the window is 3/16" with a 1/16" attachment ... (cont.)

Hello, here attached I have images of weather stripping, 3 different pieces I need at least 50-100FT each of or what quantity they are sold in please specify. Please provide a quote for resale price and availability on all 3 types if possible, thank you.

Trying to ID this part for my patio door. The only marking is on the door handle and says "K/K" on it and I believe it is a Kolbe door. The door is a inward swing type and the part is a piece of plastic that screws to the underside of the door and holds the weather stripping. It's (34.5 in x 1.5 in) ... (cont.)

I'll need about 19 feet of rubber gasket replacement, if you can identify the material from the attached photos. You see the cross section is just about 1" wide, and you see the gasket installed in the door frame. There's a groove that runs all the way around the door to hold the rubber gasket. ... (cont.)

These Anderson Casement Windows were installed in approximately 1969. I could not find any identifying marks on them. I am including the best pictures I could get of the seals. The window box has seals on both sides and the top. The window itself has a seal on the bottom of the window. ... (cont.)

Goes all around a casement window. needs to have the groove side. Grooved section is 1/4 wide x 1/4 " tube

I need to find the correct weather stripping. We ordered one but it was too big and a little off of what we need. Any help would be appreciated. Thanks

This is a Thermal Gard casement, I

I have a wood Kolbe and Kolbe french door and I need to replace its bottom weather stripping. Please identify what we need? Thank you.

the bottom white is 3/16" x 1/4" black pile I will need about 500' there is no numbers

Can you help me replace this wool pile it is 3/8" wide by 5/8" tall

I have a window that needs a replacement weatherstrip seal. It is a MW window 3X4 (PlyGem Rocky Mount Va) Their part number is 52286 piece lock. What is your part number. There are several windows that need new weatherstrip seal on the bottom sash. Does it come by the foot or by section? ... (cont.)

I was wondering if you could recommend a replacement part for a 1940

Need to replace wool pile gasket on my 1996 Certainteed windows.

kawneer made the i-line door until the late 80's.. any replacement or reto that you might know of for the plastic pile holder?

I bought 2 rolls of the 5/16 kerf mount weqtherstripping to repair 17 year old Caradco windows in my house. It is an exact match to the original but I am unclear how to get it seated properly in the slot on the bottom of the bottom window without being able to remove the window. The window has a l ... (cont.)

Im looking to replaced the white plastic seal around my windows if possible. The info I got from the window is: CODE CPM;RATING H-R35; SERIES 40 Aluminum SH; MST 3870/4060. Please let me know how and where I can get the replacements for my windows. I need it for seven (7) windows. Thanks ... (cont.)

Hello, this is the door that was installed when the house was built in 2004. It is the door that leads from the garage into the house. I need to replace the door sweep on the bottom of the door and this is the door number Premdor H461528. Do you have a door sweep that would fit this door? ... (cont.)

I have 12 Alenco Windows circa 1996. All are in need of new weather stripping. They are 36"w X 72"h. The bubble weather strip is 3/8"dia. (see Photos)