Viewing all customer Discussions for:

Weatherization

Good afternoon I am looking for replacment weather stripping for the door and the fixed jamb . The only # s i could find are in the last picture on the glass . I did make a order to you for the same door back on5/2/16 if this helps . Thanks

Hi, I have SEMCO windows from 2010. They have a kerf mounted seal, but the seal looks like a J instead of a bulb. You mentioned in another post to try the 58-053. Do you know if this worked for the other customer? Thank you

Good morning, I have a 15 year old Pella patio door whose weatherstrip is completely worn out. I cannot locate the model number or serial number for the door, so attached are several photos of the current seal in its dilapidated state. I hope you can help me identify the needed replacement. ... (cont.)

I'm looking for upper and lower weatherseals for 14 custom glazed windows from mid 1980's. Probably they are Marvin or Andersen. They are marked 24P on track and say 9000/9500 series on a label. I am attacking a sketch with dimensions and shape and images of both upper and lower seals Let me ... (cont.)

Emco Storm Door s/n 3934209 bottom of door window retainer strip. Almond in color. Does not show on their site. Need to purchase !!!

Most of the weatherstrip is damaged. The rigid piece goes over a piece of wood on the outer side of the door.

Weather stripping for Weather Shield Vision 2000 window. I believe the Weather shield part number is 27018758 WHWF

Do you have the replacement seals. Thank you. I also need window parts. I will send photos in 15 min. Thanks david

I am looking for a suitable replacement rain stop. These slide into the edges of the sash between the wood window frame and the aluminum cladding. It then loosely seals against the outer, fixed aluminum-clad frame when the casement swings closed. See dimensional sketch and picture attached. ... (cont.)

Hi, Is the price listed per foot or 25-foot?

Looking for this profile. I can't seem to find an exact match, so any help would be greatly appreciated! Thank you, Bryan

Can you help me select the correct replacement bubble seals for my Caradco 1990 vintage casement windows, Two photos are attached. Thank you very much

The sweep is about 22 inches wide. It appears to be a makeshift deal.. My question is : will your 10-325 work for this situation

Hello, I'm trying to find a replacement for the aluminum strip that serves as the weather stripping between the check rail of my double hung wood windows. The windows are Crestline's from the late 1960's. The upper sash has a grove that is around 1/16 wide and 3/8 deep in which the strip is in ... (cont.)

I'm looking for weatherseal for these aluminum windows. This seal was on the bottom of the sash. Not one window in the house has any of this seal left. You can see a groove in the bottom of the sash where is must have gone originally. The sash frame is 1-/3/8" thick. Can you suggest what type of sea ... (cont.)

This is the bottom seal of my window. I believe it matches the 39" DUAL-DUROMETER WEATHERSTRIP but am not sure. The window is 25 inches long.

Once installed, how do you keep it from shifting back and forth in the slot?

To Whom it may concern, Trying to find this special bubble seal. The base is about 1/16" - 3/32" inch with the diameter of 1/4". Not sure where can I get it. If you have it, what will be the delivery fee and how long can I get it? Thanks in advance for all your help Mike

These windows were installed about 1979 Radco series 800 weather-lok

I am looking for a replacement Rain strip for my pella window. The window model No: Pella-1098-PLCCMFX1Z1-021A059AWHT-521S-NFRC Could you suggest what i should buy. The strip width is 13 mm And at one end there are two ridges the thickness of which is 3 mm. sorry i cannot or don't know how to ... (cont.)