Viewing all customer Discussions for:

Weatherization

End view of gasket from an exterior french door. Do you have this type, if not know where I can find one.

Having trouble matching some possible Hurd weatherstripping. We have the 58-053 locally, but it will be too wide for these windows. The bulb is 5/16" tall. The base is 1/4" tall, but the single fin at the bottom of the base. is only 3/32" wide. There is no second fin. The top of the base is 3/16" wi ... (cont.)

Hello, we need help identifying this weather strip. It is on a casement window. We tried others but they all fell off. Please help

Do you have this jalousie window seal?

The backer measures 7/16" and it stands roughly 5/16 tall. ca you please send me a sample of something you may have that is comparable? Thank you, Mike

Hello Swisco! I have vinyl windows (I think the brand was Carefree) in my home and the bottom sash has this "t"slot bulb seal. I need about 20' to replace on many of the windows where the bulb has ripped off. Let me know. Thank you, Mike

Swisco, 7/31/14 Below is a picture of my exterior entrance bubble door seal. The grid lines in the back ground are 1/4" for reference. I have also included a sketch of the door jamb corner where the seal is to reside. Do you have a replacement seal that can fit this configuration? Thank you, ... (cont.)

I am look for new weather stripping for some 40 year old marvin casement windows. It appears to me that the old weather stripping looks like your part #55-106-6, can you verify for me this would be the type I need?

need Wool Pile with 1/2 inch backing and pile height at least 5/8 inch. color optional with availability.

Hi, I'm searching hi and low for a replacement seal here in the UK, it's turning out to be impossible. Can you help? Would you ship to the uk? Attached are 2 images. many thanks for your help. Regards, Simon.

looks like a 3/16" slpine and a 7/16 or 3/8" brush. It went on an Andersen screen door.

Hi, I just checked my windows and some of the wool pile seals look like they were inserted during manufacture and it doesn't look like the can be removed easily. Is this likely or am I just not looking hard enough ? thanks Daragh

The weather strip on my sliding door is grey wool pile 3/16 x 7/16. Do you have this size?

For part 54-176 is the sweep installed with the screws on the outside of the door or the inside?

This is from a store front door built in 1972. Backing is 1/2" wide plastic, with a single brush (?) that may have been 3/8" or 1/2", but I lean to 3/8". Center has a total of 6 doors 7 feet tall, with two sides of this each.

I just recieved my 58-085 weather strips. The first and last holes line up with the original holes, how ever the other ones do not match up at all plus the holes are to small for the fasteners. I have 14 of these things to install. I will have to redrill around 8 holes per strip or use small head ... (cont.)

I have a house full of 16 year-old Pella windows. The black rain stripping is deteriorating from around the casements. These are aluminum-clad wooden windows. The rain stripping is 5/8" wide with two 1/8" barbs along one edge (pictures attached). I would like pricing for replacement stripping. ... (cont.)

I am looking for 30 feet of this bulb seal...the bulb is 3/16" in size and the mounting "T" is 3/16" wide, and it stands a total of 1/4" inchCan you help me with this product.

Hello I'm searching for replacement weather stripping for a Pella casement window. Picture of the old strip is attached, measures about 5/8 inches? Can you recommend? Its brown, but I'm less concerned with color than I am fitting.

Hi, I've measured a good piece and it's .188 x .188 with cloth backing. Is this 58-021 cloth or poly backing? This sliding glass door is probably from the 70's but can't find any identifiers. I've tried some Hardware store poly backing and can't get it to engage well using a proper size curved p ... (cont.)