Viewing all customer Discussions for:

Weatherization

We have certainteed new castle windows in our house ( house built around 2005 ) and are looking for the weather stripping at the bottom of the window. We have 44 windows - do you know where we can get the correct weather stripping ?

Hi, I'm going to repair my windows rather than replace but want to be sure I get the correct weatherstrip /sealing materials. Is it obvioius from the make and era what I need to order? thanks... Ian

I am winterizing my casement windows. Some of the weather stripping is damaged. A picture is attached.

Hi, I'm wondering if you have something to replace the weather stripping in the photos. The foot is 3/16" wide. It is about 3/16" tall overall. The bulb part is about 0.09" wide at the base. It widens out to about 1/8" at the top. The weather stripping fits into a grove that surrounds the out ... (cont.)

I have Caradco swinging doors (one side)that lead to outside spaces. I need replacement weather seals. When I look under door it appears there are three rows of seals. The doors were installed when the house was built in the 1999-2000 time frame.

Hi - My window bottom has a thin slot that runs from one end to other end (left to right or vice versa) into which this strip shown in photo slides into. Do you have this for sale? Could you please help me with the name of this weather strip. Where can i buy this? I need for all the windows in my ho ... (cont.)

Hello, I want to replace the T-slot foam seals on the bottom of my window sashes. Image and sketch attached. "Q-LON" is printed on the weather strip. This appears to be Part No. QET 4001 from the Schlegel website. Can you provide that weather strip or a suitable substitute? Thank you. Geoff ... (cont.)

we need tubing for the upper part of the a double sliding door brand CARADCO 18 years old old tubing looks like small hollow tube with seal band entire tube 1/2 " width thank you. Barbara

need replacement weather strip for bottom of door and door jamb printed on dual pane glass TEMPERED 16CFR 1201-CII ANSI Z97.1-1984 1/8U SGCC-1702 AFG S142 8S6206A DOOR IS 34"W x 1.75" THICK

We just bought this house and do not know what make the casement windows are. Can you identify and sell me the weather-strip in the attached photo? Louis

Can you identify my wood door weather seal?? If you cannot,what do you have that might work!!! Dimensions: 3/8 “ round and the connecting part is 2/8” Thanks for your help, David

Photographs attached. The "T" that slides into track is 1/4". Do you have in stock? I will need for 10 windows.

Hello, replacing my bubble seal and it looks like I should use something like 58-053 on sides and 58-055 angled on top and bottom to avoid hinge hardware. Is it ok to use the two in combination? I noticed the diameters are a bit different between them. Is there a difference in compression stiffness ... (cont.)

From 1988 window. the L shaped plastic is 1/4" x 1/4" the bubble seal is about 1/4" I need to relace it on 12 window, each widow need 26" of weather stripping. Thanks.

I need to replace a lot of my windows bubble seal weather striping, it appears to me that I have to take the window "apart" to remove and replace this ??

I am looking for 150ft of the attached.

I'm needing to replace the felt or pile vertical seal in the doors listed above. It has two seals that run vertical 83.25" long. Each track measures approx. .125" inside diameter. The plastic backing of the seal measures .105" wide. The felt measures approx. .50" tall. This could be taller to clo ... (cont.)

Great web site! Thank you for the pics, discussions and order.

I thinkin the 58-055 might work for me. (Casement Windows) Instead of the V shape flap shown in my photo you have the bulb. Maybe the one without the angle seal would be better? The barb measurements are the same and the V flap, when open is 1/4" The base of the V flap attached to the barb i ... (cont.)

I have two different steel doors in my home with similar weatherstripping that needs to be replaced. 36" STANLEY DOOR: Magnetic weatherstrip on top and latch side of door base extension: 3/8" height (distance on other side of base extension): 1/2" width (distance perpendicular to base exten ... (cont.)