Viewing all customer Discussions for:

Weatherization

I need some outside window weather stripping for my Eagle brand casement windows. I have 4 of them.

Please confirm if you have replacement part (weather stripping) for subject Astragal. Door # PELLA-PEL-1105-ASCIFIA1Z2-066E080CW47-525S

Hi i was wondering if you guys could help me identify the needed seal shown for k&k windows. This is on the bottom of the window directly under the scissor mechanism for the crank. The window presses against it when shut

No identifying numbers or names found on door/windows. Suspect door is original to house that was built in late 1970s/early 1980s. Mug shot of offender included

looking for weather stripping for anderson 3 panel slidding door. the door was built in 1984. when I spoke to Anderson they beleave it is a PS12L door. If this is not available is there something you could recommend. what I have now is interlocking. The stationary side is ripped. ... (cont.)

Help! Looking to replace the bottom weather seal under the sliding portion of my patio door. It is cracked and splitting. It is 36 1/2" long. Looks like an extruded, foam-filled vinyl bulb with tiny ribs. It fits into a slot on the threshold. House was built in 2005. Absolutely no manufacturer I ... (cont.)

These Sunair windows have to endure high winds and dirt is getting underneath and to the side of lower rubber seal, it's hardened and looks short. Do you sell replacement seals? I think the windows are about 17" wide.

The "root width " is about or under 1/6 inch ; the brunch long is half inch or little more, the Door is 8feet and is Double Insert. So we need 8?2 ?2Door=32 feet

I'm looking for a replacement for the bottom window seal. The slot width is .187 inches and the flap is about .5 inches

The door was installed in 2019. Manufacturer is Taylor. Dore is 1-3/4 inches deep and 33-11/16 inches wide. Does Swisco sell a bottom door sweep to fit this door?

I have mid 1980s vintage Andersen Perma Shield casement window. Can you tell me which, if any. of your bulb seals would fit these windows?

Hi, I need to replace the weatherstripping on our windows. The glass says Cardinal IG. I think the size is .35" x .35"

Hello. I am also looking to replace weatherstripping on some double hung M&W windows -- which were also installed in the late 1980s. Below are pictures. Any recommendations for replacement weatherstripping? Thank you.

Hello -- I am looking to replace weatherstripping on late 1980s M&W casement windows. Below are pictures of the weatherstripping at the bottom/top of the sash and weatherstripping on the side of the sash. They appear to be the same design but slightly different dimensions. Any recommendations for re ... (cont.)

As you can see previous owners put one on top of another the bottom one seems to be a sticky tape piece any ideas how to replace paella windows thermastar 15 years old double hung

This is the weatherstripping for the exterior doors I'm needing to replace.

Hello, I have the following foam filled bubble seal in the pictures and dimensions provided. Please help to find an equivalent replacement for this. Regards, Handyman from Illinois

No markings on the weatherstip. It's about 1/2" around and the top slide part is 3/16". Do you have something like this?

Can you identify the correct seal?

Need 5 of these for 5 different windows.