Viewing all customer Discussions for:

Weatherization

Some of the weatherstripping for my Milgard double-hung windows has deteriorated to the point that I can't move them up and down. Please help identify which product I should order.

I have 4 Eagle casement widows I need new seals for. I will send pictures

I need a vertical weather strip where the interior side of the door meets the door jamb when it is closed. The door is a 4' x 6'-7" sliding glass exterior Marvin Door.

It's a PGT door model CD290. Cabana full light Al O/S door.Class R PG50 (37x81) type SHD.Weather stripping under door has shrunk allowing water, cold and bugs to get in. Need a replacement please. Slides in and out on metal rails under door. Just need the rubber replacement. Thank you, Jos ... (cont.)

I need to replace my weatherstripping for my aluminum sliding glass door and need pricing, please. I measured 9/32"x1/4". Thank you

Hello I'm looking for the bulb weatherseal for the above window.the .187 T-slot bulb weatherseal is not the correct one,the t-slot seems to be correct but the bulb is to small.when measuring the bulb it is 7/8 in diameter.thank you for your help.

Adw ALI A 97-2

I NEED A SEAL FOR VINYL WINDOW MY BE aRCADIA WINDOWS

Commercial door weatherstrip made of aluminum that fits into a slot.

I am looking to replace existing weatherstripping. Current weatherstripping is worn and causing some leakage. Please let me know what you have available. Thank you for your help!

Hello, Hoping you may be able to help me locate a replacement. I've tried a few varieties from Lowes and all are too thick preventing me from closing the door. Images below, thank you!

I need some outside window weather stripping for my Eagle brand casement windows. I have 4 of them.

Please confirm if you have replacement part (weather stripping) for subject Astragal. Door # PELLA-PEL-1105-ASCIFIA1Z2-066E080CW47-525S

Hi i was wondering if you guys could help me identify the needed seal shown for k&k windows. This is on the bottom of the window directly under the scissor mechanism for the crank. The window presses against it when shut

No identifying numbers or names found on door/windows. Suspect door is original to house that was built in late 1970s/early 1980s. Mug shot of offender included

looking for weather stripping for anderson 3 panel slidding door. the door was built in 1984. when I spoke to Anderson they beleave it is a PS12L door. If this is not available is there something you could recommend. what I have now is interlocking. The stationary side is ripped. ... (cont.)

Help! Looking to replace the bottom weather seal under the sliding portion of my patio door. It is cracked and splitting. It is 36 1/2" long. Looks like an extruded, foam-filled vinyl bulb with tiny ribs. It fits into a slot on the threshold. House was built in 2005. Absolutely no manufacturer I ... (cont.)

These Sunair windows have to endure high winds and dirt is getting underneath and to the side of lower rubber seal, it's hardened and looks short. Do you sell replacement seals? I think the windows are about 17" wide.

The "root width " is about or under 1/6 inch ; the brunch long is half inch or little more, the Door is 8feet and is Double Insert. So we need 8?2 ?2Door=32 feet

I'm looking for a replacement for the bottom window seal. The slot width is .187 inches and the flap is about .5 inches