Viewing all customer Discussions for:

Weatherization

Norco wood casement windows from 1984. I need to replace the vinyl glazing bead that slots into a channel Lon the edges of the sashesThe width is 1/2" and the length is 1/4"

im looking for pile weather striping for a tubelite storefront door 96" long or a roll that i can cut to size.. thank you

Recommended replacement seal. One side of the L seal had an adhesive that sticks to the outside on the window

Hi I need at least 12 feet of 1/4" bubble seal with a 3/16" Kerf in white. I couldn't find it. After looking on your site, I thought I would break down and just ask!

Thanks for writing in! We do not have a kerf mount wool pile weatherstrip like the one you have pictured here but our 58-055 Bubble Seal with Angled Base may work as a replacement. Carefully look over the dimensions and compare them to determine if this might be a fit.Unfortunately, we would not be ... (cont.)

I am looking for Jeldwen vinyl glazing bead and vinyl filler strip

hi I am looking for a parts for window weather seal old castle 27 IGCC E 2190

Hi -- can you determine this size of this? we need 200+ ft

I am in need of 250 SqFt 3/8 foam weatherstrip in white as well as 12 SqFt 1/2 inch foam weatherstrip in white

The rubber weather stip/seal at the bottom of my Gorell vinyl widows that were installed in 2000 is becoming loose on some windows and is completely detached on others. The photos show that the rubber strip is not quite 33 inches long and 3/4th of an inch wide. Where can I get replacement strips? I ... (cont.)

Do you have a replacement part for the bottom molding of my Pella sliding door similar to this picture?

I have a Lee Haven door that exits to the outside from our garage. It appears to be 32"W and 79 1/4"H. I need some weatherstripping and wanted to inquire if you have any that might match. I have uploaded photos of the door and weatherstripping that I took off.

Weatherstrip on closing side of door torn. Is it glued on? Pella wooden slider of same vintage. if you find any info on repair please post

Looking for replacemnet weather stripping for some older windows that are series 8300 and AAMA/NWWDA 101/I.S.2-97 and H-LC30-48X96. Any help would be greatly appreciated. Thanks.

i am looking for replacement weather stripping / seals for my windows all windows were manufactured or sold by 84 lumber possibly around 2003 the felt measure 3/16 wide by 1/4 high ,one piece of stripping looks smaller could they have used 2 sizes of weather stripping the bottom bulb seal measures ... (cont.)

I am looking for a match or substitute for this glazing bead. It came off of a NUAIR window. Please see photos for measurements, appears to be 1/2" x 1/2".

I need about 40 inches bulb seals

Kolbe Door is approximately 25 yrs old. Bottom weather strip has cracked off in places. Need to replace.

The window seals are deteriorating and I need replacements the photos show that it's an angle seal. I don't have part number. This molding only has the one slide in groove and the seal itself measures 3/8 the entire seal is flat with one track. I would need a roll of this if you have it. Thank you M ... (cont.)

Located on Head Jamb Parting Stop. I removed the parting stop and held together (to take a picture) the broken off flexible part of the weatherstrip. This wood single pane double hung window has No weatherseal on the top sash except for this flexible weatherstripping to keep the elements from gettin ... (cont.)