Viewing all customer Discussions for:

Weatherization

Found 7 2 90 7 M1 and ICGG CBA 03 on the windows themselves. They all have 2 weather strips. I have pictures and measurements of both, but want to make sure I'm purchasing the correct product before ordering.

We are trying to find the same or similar product from Guardian Industries as soon as possible.

Could you heol with those parts . One is a buble . the other one I dont know

I have a Trapp screen door that was installed in November, 2005. I am looking to replace the bottom door brush sweep. The brush itself is 31 inches long and 0.5 inch wide The brush is attached to a 1/8" x 1/8" rib that is inserted into a slot at the bottom of the door sweep. I have attached some ... (cont.)

We need to replace the seals on the bottom of our Norandex windows. It looks like the slide in a groove along the bottom. Do you need to remove the window to insert the seals? Also can you identify the replacement seal? The dingoes are around 25 years old. Many thanks

I have Patriot roll out windows that are in need of new stripping. It appears to be a 5/16 bubble with a slot efge that slides in groove of window frame. I have included pics of the item, albeit very disintegrated, as well as the window and frame. The windows were originally installed new in Febru ... (cont.)

Do you also need a picture of the window?

Polaris window need weather strips 15 foot of white and 6 foot of brown is needed

We wanted to replace the weatherstripping on the Norco casement windows we haves series. JEL-N-330. I attached a photo with the label. Would you happen to carry the parts and instructions for repair? Thank you in advance for any help you can provide!

T shaped 4mm across the top, 4-6 mm pile

Hi, I need to replace some black pile in an aluminum, double door store front doors and I'm having a hard time finding the right match. The width of the pile is 1/4" but is extremely tight in the aluminum channel, although assuming new pile will go in easier. The height of the pile appears to be 5/1 ... (cont.)

Hello,I am looking to replace some weather stripping on my windows and hoping you can identify. I wasn't able to see a manufacturer on the windows. Let me know if you need further photos!Thank you,Jonny

Hi the weather stripping on our windows needs replacement after 12 years . They slide out from the bottom of the window We will need different lengths but what is the kind that fits our windows?

This is to ask for help in identifying a slotted window sash weather seal. The window sash was manufactured by Norwood Windows, a Canadian firm, in 2010. The slotted piece appears to be 1/4 inch. The round bulb appears to have a diameter of 1/4 inch.

Hello, I have older wood windows trying to find replacement Weather seal that appears to be hollow bulb gray color kerf mounted into the bottom of the window sash, bulbs have smashed and some of them coming out of The kerf, could you recommend a similar type curve appears to be about 1/4" to 5/16 in ... (cont.)

I'm looking to replace weatherstrip for Jeld-wen siteline clad sash C series casement windows. Size frame 24 5/8 x 35 5/8. Photo of weather strip attached. Thank you

I am trying to replace this bug seal on a set of French Doors. The total width is a little over 2" which is not a size I have been able to find after more than an hour searching. I am including a photo of the door handles, in case that helps identify the manufacturer (I cannot find a label anywhere ... (cont.)

Need exterior weather stripping to fit T-channel

One of the panel locks does not seal properly.

Hi,I have American Craftmens double hung windows. The weather stripping at the top of my screens are dry rotted and bugs are getting in between the window and screen. The slide in part at the bottom of the weather stripping is 7/32" wide. The pile sits to the side of the stripping (see photos). I ... (cont.)