Viewing all customer Discussions for:

Weatherization

year 2005 Crestline Crestwood with vinyl casements( and believe also known as Weathershield) The seal is not applied to the casement, but is applied to the opening frame. Needing the bubble seal for these casment windows. Are they sold in a roll by the foot?

The Jeld Wen weather stripping is deteriorating. It's on a 10 year-old wood slider. Do you have a replacement?

I need the bottom seal to replace on my windows. It is bulb type and pushes or snaps in the slot. Don't know size so sending pictures. The closet size I got was 3/8 bulb, 1/8 slide in or snap in piece/ part and all of it about 1 inch wide and 32 in long. I also need the window tilt latches I sent an ... (cont.)

Hi, I'm trying to find replacement rubber weather stripping for my double hung windows. I do not know the manufacture, windows are about 23 years old. Let me know if you can ID the weather stripping from pictures. I can send more pics if need be. Thanks

My weatherstripping on my windows is over 20 yrs old. The windows were in the house when I moved In, so, I do not have any information on them. It appears I need t-slot offset bulb foam weatherstripping. Let me know if you need additional information. Thank you for your assistance. Cathy Culbreth ... (cont.)

It is white and has the same dimensions as Product Code: 58-114 but it is a hollow fill....and white.

Looking for seals for this door. Old seals pretty much disintegrated. Hoping you can help us. Do new seal come with instructions how to get them in the channel

Windows were installed 25years ago from Portland glass Co. Noreaster windows built by Anderson window Co

Help. Outside of patio door by glass

Hello, Please help me to find window insulation "brash". It is inserted between window and frame.

I have a Stanley residential steel door 36 in. I am looking for the rubber gasket that fits into the metal threshold and seals the door at the bottom. Could you let me know if you have one ?

I removed this piece of weatherstripping from my window. There was a place that it slides into on the bottom of the window. The total height of it is approximately 2cm, the diameter of the foam bubble is approx. 2 cm and the part that sticks out to the side in the last photo is approximately 1/2". ... (cont.)

Hello there, Hoping you can help me find replacement weatherstripping for my front door. I've attached photos of the seal in the flange, and of a cross section. Dimensions are: Overall height = 3/8" Overall width = 7/16" Bulb width = 5/16" Base width = 1/4" Base extension is difficult to measure ... (cont.)

Looking for the weather stripping for this Pella sliding door. The SS# of the door is in the Subject above. Thanks Al

I am looking for this wood window weather stripping, off roto casement

I am looking for this type of weather stripping for 4 windows in my home.

Cerrainteed vinyl windows installed in 1989. Need t-slot bubble seal 1/2 diameter.

hard plastic weatherseal on sides of casement windows, just under 1" in width, do not know name of manufacturer, do you have a seal that could fit? looks like it was stapled in place, windows are about 48" long.

These pictures show my weatherstripping at the bottom of what I believe is an MW Window. They were made in Rocky Mount Virginia about 30 years ago. The windows are in great shape, but I would like to replace this aging weatherstrip. Pictures show the base of the weatherstrip and the round body that ... (cont.)

I called a bit ago about replacing weather stripping on Larson storm doors and steel frame windowsThank you, Liz