Viewing all customer Discussions for:

Weatherization

we have 2 7ft doors that have this weather strippng that need replaced

Bottom of Crestline windows has cracked insulation Do you have replacement.

Looking the weatherstrip gasket

I am looking for weather stripping. Used in Quaker casement windows in 2009. My windows are 28×58 in. I need enough for four windows.Thanks for the help

I recently purchased some Jeld-wen windows. On one of the double hung windows, the bubble weather stripping sticks out a bit and makes the window difficult to open. I called the retailer and they sent me to Jeld -Wen. They seemed familiar with the problem, but want me to fill out a report to decide ... (cont.)

I have pile WS around the doors of my boat. I need to replace them. Kerf is 3/8" deep and maybe 1/4" wide at the bottom of the pile. I would guess the pile was 3/9" to 1/4" in depth above the kerf. Any chance you have this or know who might?Thanks, Ian

Hello, I am looking to replace the seal on my front door threshold. The door is an MAI Entry Door purchased in 2008. They are no longer in business and the door is fine except it needs new weatherstripping including this piece. Do you have anything similar that I can use? Thanks. Jim ... (cont.)

I need some replacement weather stripping for an old Hurd window. Do you have this weather stripping available?

Trying to find sweeps for this exterior double door with hinge. See pictures below.

I am looking for replacement rubber seals for my windows

Your weather stripping comes only in 82" length. My doors are around 96" tall. Is it possible to get taller pieces. We need to replace many of the Duo-durometer Door Bottom Sweep. We have not taken the door out but it looks like they are attached with 2 screws in the bottom, is that correct. Do yo ... (cont.)

Pile weather stripping from vinyl window. Im not sure on the correct size to order. thank you

I have 23 yr old wi dows where the vinyl window casing is cracking and breaking g away. I would like to replace, but unsure of the part to order. Casing is 1/4 inch square with a 1/4 lip that goes under window.Do you have a part to recommend? Or can I simply use some glazing compound and or weath ... (cont.)

I have 30 windows made by Republic windows in Chicago around 2005. I need top and bottom seals for my screens. Do you have info about Republic windows on hand or shall I try to find an undamaged screen and send you photos. Thanks in advance, Art

Hi, I can't seem to find anything like this. It is from an aluminum clad Therma-Tru door from approximately 2005 to 2007 ish? I can't remember exactly when I replaced them, but guessing that's the approximate time frame.

Hi, looking to see if you have this profile of these two weatherstripping from a discontinued pro line door.

I'm trying to find replacement weather stripping for a Milgard french door. The weather stripping runs vertical. Door code is HGD-C30-96x96. Thanks

Looking for this style weatherstrip Please advise Thank you

Please see picture. Not sure of who manufactured the door but we have two of them and these seals go up the vertical edges

Please recommend replacement weatherstripping. Thank you very much.