Viewing all customer Discussions for:

Weatherization

kerf depth is 5/16 is 90 degrees to the seal the other end was v shaped and broke off but is about 3/16 gap between the window and the frame. for windows with mfr code LN-1 series clad casement aama 101/IS 2-97 C-LC60-37x77 C-LC65-33x73 i was assuming the 9/32 angled base bubble seal would fit. ... (cont.)

I have a Anderson slider probably 15 years old and were the door closings into the molding/weather strip is falling apart it seems like it's one piece and screws in to place if you can get me a part number would be helpful pictures below Thank youBrian

What do I need to purchase to replace this?

This is from a French door from about the year 2000. We will need about 30' of it in brown or bronze. Could you direct me to the best option for this replacement?

Looking to match the window glazing bead. Our customer believes that the window is brand is Castle House.

want to make sure this is NOT stick-on.

I am seeking to replace the glass/frame seals and lower frame/slider seals as depicted in the attached PDF document. The windows were manufactured by Likit (Hayward, CA) around 1980-81. I would also like the plastic tabs which make the slider window seat properly when closed. These are located ... (cont.)

Will this fit United window and door 4100 series double hung windows?

I am afraid we've seen Simonton windows use a variety of weather seals. The best way to know what you might need is to remove a sample and show us its end profile, along with dimensions. That would help narrow things down. See the video below for reference.

I need to replace the weather strip attached to the threshold of our doors. There is a track that holds the strip in place. I believe the doors are Sierra Pacific.

Hello What is the height of the kerf fins? My stanley entry door is approximately 20+ years. I have tried Frosty King from HD & MD from Lowes the fins are 1/8 short. The old sweep fins are 3/8". TY

I am trying to locate this pile weatherstripping for a commercial door. The base is about 1/16" and the material extends about 1/4" out.

Please identify the best replace for this part. It is a rubber strip that is a the bottom and top of the the windows.

Looking for some beige foam weatherstrip for older amsco casement windows. Windows are approx 20 years old

How long is the Andersen Bubble Seal with Angled Base Product Code: 58-187 Thank you

It looks like the 9/32" Bubble Seal With Angled Base is the right replacement for my windows. Is that what you see as well?

I am looking for the weather strip for a Louisiana Pacific sliding glass door. About .5"x.5"× 77".

Looking for gray replacement weather stripping for bottom of crank out window, non wood. Windows were installed back in 84-86.

Please indentify these weatherstripings. I need to replace both.

I'm looking to replace the rubber weather stripping and white pile for an old Guardian sliding glass door for a manufactured home