Viewing all customer Discussions for:

Weatherization

Your weather stripping comes only in 82" length. My doors are around 96" tall. Is it possible to get taller pieces. We need to replace many of the Duo-durometer Door Bottom Sweep. We have not taken the door out but it looks like they are attached with 2 screws in the bottom, is that correct. Do yo ... (cont.)

Pile weather stripping from vinyl window. Im not sure on the correct size to order. thank you

I have 23 yr old wi dows where the vinyl window casing is cracking and breaking g away. I would like to replace, but unsure of the part to order. Casing is 1/4 inch square with a 1/4 lip that goes under window.Do you have a part to recommend? Or can I simply use some glazing compound and or weath ... (cont.)

I have 30 windows made by Republic windows in Chicago around 2005. I need top and bottom seals for my screens. Do you have info about Republic windows on hand or shall I try to find an undamaged screen and send you photos. Thanks in advance, Art

Hi, I can't seem to find anything like this. It is from an aluminum clad Therma-Tru door from approximately 2005 to 2007 ish? I can't remember exactly when I replaced them, but guessing that's the approximate time frame.

Hi, looking to see if you have this profile of these two weatherstripping from a discontinued pro line door.

I'm trying to find replacement weather stripping for a Milgard french door. The weather stripping runs vertical. Door code is HGD-C30-96x96. Thanks

Looking for this style weatherstrip Please advise Thank you

Please see picture. Not sure of who manufactured the door but we have two of them and these seals go up the vertical edges

Please recommend replacement weatherstripping. Thank you very much.

kerf depth is 5/16 is 90 degrees to the seal the other end was v shaped and broke off but is about 3/16 gap between the window and the frame. for windows with mfr code LN-1 series clad casement aama 101/IS 2-97 C-LC60-37x77 C-LC65-33x73 i was assuming the 9/32 angled base bubble seal would fit. ... (cont.)

I have a Anderson slider probably 15 years old and were the door closings into the molding/weather strip is falling apart it seems like it's one piece and screws in to place if you can get me a part number would be helpful pictures below Thank youBrian

What do I need to purchase to replace this?

This is from a French door from about the year 2000. We will need about 30' of it in brown or bronze. Could you direct me to the best option for this replacement?

Looking to match the window glazing bead. Our customer believes that the window is brand is Castle House.

want to make sure this is NOT stick-on.

I am seeking to replace the glass/frame seals and lower frame/slider seals as depicted in the attached PDF document. The windows were manufactured by Likit (Hayward, CA) around 1980-81. I would also like the plastic tabs which make the slider window seat properly when closed. These are located ... (cont.)

Will this fit United window and door 4100 series double hung windows?

I am afraid we've seen Simonton windows use a variety of weather seals. The best way to know what you might need is to remove a sample and show us its end profile, along with dimensions. That would help narrow things down. See the video below for reference.

I need to replace the weather strip attached to the threshold of our doors. There is a track that holds the strip in place. I believe the doors are Sierra Pacific.